Why not just buy a cable that is made for subs? I bought a Kimber Kable Cadence cable that works just fine, and is reasonably priced. 2 meters with WBT connects is around $225 at the Cable Company. WBT's are great. But if you want just RCA connects, it's about $170 for a 2 meter cable.
DIY Spekon Cable For Rel
I’m looking to make a pair of speakon cables for my Rel subs. I could really use some advice on what would be good choices for this type application. The cable hooks to the amp outputs but from what I understand is just carrying low level signals. I am not sure if a shielded cable would be ideal or just a twisted pair of high quality wire. I run them as a stereo pair so only need two wires and 8-10ft long. I’m not looking to spend a lot maybe $100-200 but less would be better. I have 50ft of 12awg silver plated PTFE ofc that I’ve debated using. Just seems excessive for the application I suppose. I believe the stock cable Rel provides is only 24awg. Anyways would love any thoughts or opinions on the matter. I really don’t have a lot of knowledge when it comes to cabling. Thanks!
- ...
- 30 posts total
Get these they can configure/terminate however you want, use genuine Neutrik connectors and in your budget delivered from the UK
way better than stock
https://www.designacable.com/rel-twincore-subwoofer-cable-for-dual-stereo-sub-setups.html |
The current draw is small due to the high impedance input, but this is still a high-level speaker connection from your amplifier output. It is not a low level, low voltage connection and you do not need shielded cable as with low level interconnects. Any decent speaker wire will do here. Your existing 12 AWG speaker wire is well oversized, but it will work just fine if you have plenty on hand. Otherwise, even 18-20 AWG will do, and there is no reason to spend big here. Buy genuine SpeakOn connectors from a reputable source, download the connector documentation to address any questions about the terminations, and you're done.. |
@brylandgoodman several years ago I did a search on YouTube regarding how to make the speakon cables for my Rel subs. Easy directions and video to follow and you can use the 12awg silver plated PTFE ofc wire you already have, which will not effect the sound of your Rel subs. |
- 30 posts total