Surge protectors--how many $ make sense?


My power went out during the LA fires. A power spike blew my preamp's fuse even though it was plugged into an ancient Monster transformer surge protector. So, I need to buy something to plug my gear into. The prices, however, range from a few hundred dollars to many thousands of dollars. Surge protectors have never been at the top of my list of equipment to buy, but I think it's time.

I have a fairly expensive system, about $75K, consisting of VPI Prime Signature turntable, ARC PH-7 phono preamp, McCormack CD (universal disc), Pass XP 30 preamp, Moon streamer, and Hovland Radia amp. New equipment mixed in with old, but all very good stuff. I've never compared surge protectors. So, how little can I spend on a surge protector without disrespecting my previous investment? 

128x128audio-b-dog

My 2015 house in the American Southwest has a breaker board that trips if you burp too loudly. So I just run two entry level Furman power strips, which occasionally trip. I had an electrician inspect my $30K system. It's all class D.  He said the amp draw was nowhere near overload.  

My 2015 house in the American Southwest has a breaker board that trips if you burp too loudly.

@incorrigable 

That's actually not a good thing.  Since you had an electrician inspect your audio system I imagine you also had the panel inspected?

I've been in this 2006 home for 4 years and the only time I've had a breaker trip was entirely my fault or during GFCI testing.

@rfagon

UL Listed is for complete products. UL Recognized (U and Reversed R) is for “recognized components” that have been subjected to testing limited by their conditions of acceptability". The individual MoVs are generally recognized since they do not have an enclosure or NEC compatible connection to the mains.

I was a UL product safety engineer and did some work on TVSS in the late 80s. Spent most of my UL engineering career testing and certifying SMPS and electrical medical devices for safety.

@rfagon Clamping voltage is a single dimensional specification, It means very little unless the clamping time is also specified. In the case of SquareD, their whole house surge protectors have a clamping time of 4-6 nanoseconds. When you consider that a single 60 Hz cycle is 175,000 times longer, you begin to understand how very effective they are in the real world. That said, the Environmental Potentials products are the real deal, and engineered (and priced) accordingly to their higher performance. The EP-HPS at $2400 isn't cheap, but their lack of pretense about their products is very appealing.

My experience is a two-fold approach 

1. Whole house surge protector 

2. Shunyata denali and Alpha v2 NR cables. The difference in sound (or more specifically lack of sound and noise) was noticeable to me. It also has a mechanical surge protector 

I view this as performance enhancing and protection