Last Critical Tweak… how to quell occasional high harshness…?


Dear Audiogon Community,

 

I am so impressed with the insight and obsession we all share with this musical alchemy of electrons. I write to address a simple problem through as simple (and hopefully relatively inexpensively) as possible… though before such elegant maneuvers, an overly verbose and fussy description:

 

 

Harshness in the highs…. Trumpets and some vocals now make my ears shrill at times. My aging ears! It is so close to musical bliss, but this slight edgyness must be quelled!

 

This song, horns seem to shatter. 

This song, vocals seem to pierce. 

 

I recently leveled an entirely new system. My last tweak was to move my main gain tube to Mullards, and the Brimar NOS tubes to the outer gain location. The mullards afforded a richness and expansiveness, a forward mid and elegance, but introduced the occasional shrillness which I seek to quell. 

 

My musical electron dance is as follows on the streaming side:

 

Nagra Streamer —> Audio Zen MC2 Coax —> Halo Audio Spring 2 Level 3 Kitsune —> Duelund 16 GA Interconnect —> Prima Luna Dialogue Premium HP —> Brimar NOS outer tube and Mullard NOS main gain tube —> Gold Lion KT77 Power tubes —> Duelund 16GA Speaker wire —> Pure Audio Project Duet Horn’s with a gold silver oil Mundorf Cap upgrade —> Duelund wire to the horn and the 15” Woofer. 

 

Fun yes! Devine! But how to quell this one last occasional shrillness?

 

Thoughts:

-Speaker Wire to 12 GA

-DAC - Amp Interconnect changed to something that mellows out the shrill

-Main Gain tube upgraded from a Mullard NOS to something else… (I believe there was a slightly higher grade Mullard?)

-Nagra Stream - DAC Coax cable upgraded to something mellower….?

 

Open to any and all suggestions! Thank you so much for your insights. 

 

R. 

whyrichard

I would experiment with speaker placement first because it costs nothing. You didn’t mention acoustic treatments, but that would be next on my list if your room is not treated because it may bring you all sorts of benefits In addition to entertaining the highs. 
 

After a cursory look at your components... it is really puzzling. It would take some really bad interconnects to do this kind of thing to the sound of your components. 

Could we please see your system. Please post photos in a Virtual system. When the description of a problems is so unusual, it is often something not mentioned. Thanks. 

Very rare for Duelund 16ga tinned copper to be called harsh, yes, I've seen a few reports but generally  Duelund products natural timbre. On the other hand 16ga is rather thin gauge for speaker cable, may be emphasizing upper mids and highs.

 

I ran PL Dialogue a bit ago, preferred EL34 vs KT. Also run Duelund wire in my modified Khorn crosssovers, they are not harsh or unnatural, no way.

Without some data about the room, first, I don't have much to say about gear.