Micromega MyDac and Windows XP

Thanks for the suggestions. I have tried most but will start again from scratch. BTW, the same driver install issue occurs with Windows 7 on my laptop. Will report back.

Uninstall and reinstall fails. The actual dialogue box within the installer says to 'remove, reinstall and turn on the device you wish to install.' Anyway, I tried it both ways to no avail. Next step is talking to the U.S. Distributor.

Another thought: Are the USB ports on your older XP computer USB 2.0? If not, and they are USB 1.1, that would probably explain the problem with that computer. If you are not sure, let us know the make and model of the computer, and/or the approximate year it was purchased.

And are you using a USB 2.0 compatible cable? If by any chance you are using a cable dating back to the days of USB 1.1, that would probably explain the problems installing to your Windows 7 computer as well.

Hope that helps. Regards,
-- Al

I finally have my 192 driver installed, which allowed me to enable kernel streaming for the first time. 24/192 files sound wonderful. Keep in mind I'm running Windows XP.

My problem may have been user error but after deleting all MicroMega files, I began from scratch. I kept the MyDac unplugged and unconnected until the software asked for it. When I plugged it in and connected it, Windows recognized it with a pleasing sound (new device detected) and the driver software installed. This allowed me to choose the kernel streaming option in JRiver 17. I should note that I also have a Dragonfly DAC attached that I use for my computer desktop speakers and I can now easily switch between the DACs (using a combination of the Control Panel and JRiver 17) without trouble. The MyDac goes to a Linn Kairn, then Linn Akurate 242s bi-amped with Klouts.

Success, satisfaction, and great value from this nifty French unit.

Excellent! Thanks for letting us know.

Regards,
-- Al