Esoteric G-02 clock - your thoughts

I believe the specs on the OCXO clocking options with the G-03X and G-02 are very similar to each other so you'd be getting a good solution with the G-03X (one that I've spent years owning and enjoying with a P-03U/D-03 combo) however the 02 is Esoteric's latest assault on improvements in that circuit, the unit in general and the master clocking outputs in general from what I've read. I've recently done A/B testing of a P-02/D-02 both with and without my G-03X clock and found that the new clock in the D-02 in master clock (22.x) output mode gave equal or better sonic performance to playback versus the additional complexity of the 3rd box (G-03X) in the system so I've taken the G-03X out of the system and have the P-02 slaved to the D-02 clock with very good results. The G-02 is based on the same generation of clocking in the D-02 with everything optimized beyond that for a standalone unit so I surmise the G-02 will be one hell of a clock.

You did not say what you would be using the G-02 or G-03X to be a clock source for. So, if I were guessing, I'd say;

- if you were utilizing the clock with a P-03/D-03, go with at least the G-03X and if you could afford it, the new G-02 clock versus a used G-03X to get the latest and most stable clock (the G-03X will have some age to i)....
- same note on other Esoteric equipment that accepts a clock (other than P-02/D-02 or the 01 series...) and other manufacturers transports and DACs; go with the G-02 to get the latest clocking technology with little or no age on it. Reason I mention age is that all manufacturers should tell you (Esoteric does) that all OCXO clocks will 'drift' a bit over time and with repeated handling, moving, etc....these drifts are small assuming careful handling but they do happen from what I was told (I am no expert). Rubidium and Atomic have little or no drift and are much more expensive....

- If using P02/D02, I'd suggest utilizing the clock in the D-02 as it sounds great to me this way and the extra money MAY not be justified...

- if using the 02 or 01 systems and you definitely want an external clock, the only move is the new Rubidium clock from Esoteric (the 01) or the prior G-0Rb or G-0s RB-oscillator clocks...

This is detailed stuff...let me know if I've confused things or if you have specific questions beyond this and I'll do my best to answer......

Hello Zephyr ...many thanks for taking the time to answer my question. My G-03X is matched with the Esoteric P-05 / D-05. I also have the Esoteric C-03x pre-amp and the A-03 amp. I was looking at adding another A-03 amp as we have an authorized dealer ( and great people by the way ) here on Audiogon that is selling one at a good price, but I am not sure if I want to get into bridging that amp as it a good one all on its own. So, I am looking at upgrading from my current G-03x clock. I do see where the G-02's clock has improved as well as the power supply which is critical and should / must mean an overall improvement in sound.

I have a K-01X for which I'm also trying to rationalize external clock options. The G-01 and G-02 are redoubtable, but at those price premiums it is worth considering solutions based on scientific instruments or pro audio.

From a web surf it seems that the G-01 uses a Stanford Research Systems PRS-10 10 Mhz rubidium core. The G-02 has a cheaper Spectratime LCR-900 core. If your transport/DAC can't directly accept a 10mHz sine wave as a master clock, you would need to add a distribution amplifier that outputs Word Clock in multiples of 44.1kHz and 48kHz. Respected examples included Grimm CC1 and Antelope Trinity or OCX.

The premium 10Mhz rubidium master clock in a plug & play enclosure is SRS PERF-10(75 ohm BNC outputs) or SRS FS725(50 ohm BNC outputs). Both use the PRS-10 core as in G-01. I'm unsure which impedance is more appropriate to match an Esoteric CDP, as some Esoteric literature broadly specifies 50-75 ohms.

Both clocks include an integrated low noise SMPS. The PERF-10 has an optional port to accept an external 12V/5A linear power supply. I'm thinking of something on the high order of quality of Paul Hynes or HD Plex. For the FS725 it would be a relatively simple job to get inside the enclosure and install a power port to an external supply. In that event the PS would need to be 24Vdc/3A.