stylus cleaning

Hi everybody

I only brush my stylus from time to time and that's all.
It seems it's not enough as I read that you all use different liquid or else.
As I am living in France the Mr Clean Magic Eraser solution is out for me.

So could you tell me please what I may use and what I must avoid .

Is also demagnetizing a cartridge absolutly necessary

André

Andre,

Dry brushing alone is not adequate. Even if your records are perfectly clean, the stylus acquires a thin (molecular) layer of vinyl from each play. If this is not removed regularly it will continue to build up. This can be seen on well-used but uncleaned styli, which slowly go dull or yellow.

If you wish, email me your address and I'll send you some Magic Eraser pieces. Value for customs will be about .001EUR, so it should get through okay!

Search the archives for "demagnetizing". We've been through that topic several times in endless detail. Short answer: it depends on the cartridge and on who you ask, but active demagnetizing has ruined some cartridges so don't do that without researching first.

Use the Zerodust. It's available at many online stores so access should not be a problem.

As for demagnetizing a cartridge, well you've just opened up another can of worms. I'm sure there will be lots of opinions for you to digest on this one. As for me, I no longer do it, either via the Benz demagnetizer or via the Cardas record sweep.

After each side I do a stylus check with a 20x loupe mounted on a stand at the right height with focused back-lighting from a gooseneck Littlite. I suppose that is fanatical, but its now just a habit. I've tried a bunch of different techniques including the same AT vibrating cleaner, the small Last type brush, the Mr.Clean, and Zerodust.

With the caveat that it is not suitable for all cartridges, I've used LAST for over twenty years with very positive results. I think it mitigates the molecular level vinyl build-up that Doug mentions - though I haven't any molecular level evidence besides ease of stylus cleaning.

A fine sable hair artist brush with the tip clipped down a bit does an excellent job cleaning bits off the cantilever and motor mask. When more is needed for stylus cleaning I find the Zerodust gives the best and most consistent results with the least potential risk. Typically a single dip into the Zerodust is all it takes. Do it often and gently and there will be no need for more agressive cleaning. The Zerodust has a cover and is reuseable - cleans up easily with distilled water after a month or so of use.

Don't mean to sound like a Zerodust ad, but after years of using a bristly little brush (back to front only please) I welcome it as a safe effective product.

Tim

Jtim, not only is check your stylus everytime with a loop fanatical, but also pretty annal, however, i noticed you mentioned cleaning the zerodust with distilled water, i usually just wash mine under the sink with a little bit of dish soap or something and the rinse and let it dry, i haven't heard the distilled water thing, am i doing something wrong or harmful ?