Has Anyone Removed & Replaced the VPI Arm

I recently bought a JMW-10 arm, and then some upgrade parts from VPI, to install as a second arm on a custom plinth. This arm does not require a mounting hole as do most other arms. There is a base plate for the arm that requires three machine screws to secure to an armboard or plinth. Everything for the arm itself and the connecting wires attach to this plate.

Therefore, mounting is simple: measure the base plate location position per VPI, drill three small holes for the base plate, install three screws, and set up the arm.

Bravo!!!! Thanks

One thing you may want to consider is that the longer arm is more difficult to handle than the shorter one. With the unipivot design the assembly tends to be more difficult to place on the leading edge groove and remove from the center after play. My friend has the Aries with the 10.5" and I have the Scout with the 9" arm and I always feel a little awkward when playing an LP with his rig. I'm not sure it bothers him much since he is probably used to the longer arm. Question: what kind of improvement do you expect by swapping out the short for the long arm?

..you mean aside from depleting the bank account? When I get the new one in, I'll tell you what differences I hear. ..and here's a hint. If you where glasses, remove them while listening. You will hear greater depth, air, etc. This doesn't apply if you wear contact lenses.

Hee Hee.That was good.Wish they offered the 10.5 on Scoutmaster but realize different plinth altogether guess Harry thought more $$$ to be made with those who might wan to the update and having to start with $6 Super.I have 12.5 Aries and want more compact uni and considering between two decks Scoutmaster and Super.Cost of SDS and ring clamp make it $2900 verus $3500 if you factor those as wants.Stingreen I was wondering since your going for 10.5 which should sound better (though not sure how much since 9 and 9 sig are damn good) if the $1K heavy platter might make more difference am going to call and ask how much standard Super weighs verus the 25lb unit.Damn glad I
never went from the TNT5 composite to TNT6 acrylic.It was sad to hear everyone who bought (mainly to get ring clamp) say it was "not better not worse but a lighter more lithe presentation blah blah etc etc" and hen see they came out with a 25LB for $1200.I just want smaller deck or I re-wire my 12.5 and get 25lb platter as well as SDS.If I go Scoutmaster going to go with 25lb as you can't help but get better results with higher inertia.But I wonder buck for buck if platter upgrade isn't better than 10.5.I rarely used VTA unless I went from standard to 200 gm LP's.
Chazz