2. analog
  3. 1208895570

VPI anti-skate device

I have a VPI scoutmaster wtih JMW9 tonearm. I purchased the add-on anti-skate device and I am having trouble setting it up. I installed it according to the directions I found here: http://www.elusivedisc.com/prodinfo.asp?number=HW-JMW1015

However the device is is interfering with the full rotation of the tone arm. The left side protrusion of the tone arm hits the anti skate device. Can some one with a JMW9 and the antiskate device take a picture of their set up and email it to me so I can see what I'm doing wrong?

Steve
arnold_layne
kmulkey
173 posts
 
Do you have the black junction box? If you have the older one, that may be the issue.
arnold_layne OP
141 posts
 
I have the black junction box. I think I got it figured out. The pictures shown on the website show the device coming out perpendicular to the tonearm. I had to angle it a bit to make sure the tone arm clears the device when tracking a record.

Steve
dodgealum
1,402 posts
 
I would recommend you return the thing and go back to the wire twist for anti-skate. There are multiple issues (problems) with the design and you will frustrate yourself needlessly while failing to obtain better sound. I played with mine for about a month and finally decided it was one of the most poorly designed add ons I'd ever come across.
stringreen's avatar
stringreen
6,435 posts
 
No Dodgealum..wrong advice. Although the twist method may be correct when new, eventually the wire looses its tension. To be truthful, Harry likes no anti-skate at all, however, I have found the VPI device audibly helpful. I had the 9 Sig, and now have exchanged it for the 10.5i which because it's longer, should have less need for anti=skate..and yet... Notice Arnold the the device should be adjusted. The unit has many adjustments to provide optimum Anti=Skate. Don't just put it on..adjust it to its optimum
More to discover