What's a good beginner turntable at $2500+- range?

I am a loyal Sota owner having owned most of their models. That said there are a few things to consider if buying a used Sota. Make sure the vacuum lip is current and the bearing is in good shape. If the deck is prepared properly for shipping it will travel with no problems (I have shipped several) however if the transit screws are not properly snugged the bearing will be damaged. The last 2 I purchased here on a-gon had damaged bearings even though the seller said they new how to pack them. Your best bet is to find a nice clean nova or star and figure to send the platter (easy to remove) and vacuum pump back to Sota for inspection and rebuild. The total cost is about $800. but if you factor that into your purchase price you will have an as new Sota which will give years of service and floor you with its resolution. Kirk and Donna at Sota are freindly and helpfull and support all their models very well.

Mike,

I recommended the Acoustic Solid as it really does represent unusual mechanical integrity (key for a mass loaded 'table) at it's price point. I'll stand by that statement, but the Tere/Galibier suggestion is worth taking. The Colorado cottage industry in 'tables is awfully highly regarded, and since you're in Colorado, you can do this pretty painlessly. I'm in LA and seriously thought about it until logistical issues made a trip impractical. IMHO, before buying anything it would make real sense to visit these guys.

Good Luck

Marty

Thanks. I'll look them up.