2. analog
  3. 1221326781

Help with uninspiring sound with my turntable.

Can anyone give me some suggestions what to do to improve my vinyl sound - I purchased a Wilson Benesch TT with their .05 arm and a Sumiko Celebration cartridge here on Audiogon. I have a Mac c500t pre-amp that is still breaking in . The sound quality is lac-luster, and particularly annoying is the vocals can sound "crunchy" and extremely edgy. I don't know how many hours the cartridge has on it. I have tried different loading impedance's - but something is so off I would really appreciate any ideas. I listen to Jazz and Rock albums mostly. Thanks for your input!
liketolisten
lwood
61 posts
 
Alignment is a good suggestion, but don't expect much until the Pre is broken in.
mred
88 posts
 
Does your pre-amp have a MC/MM setting? Are you using the correct setting?
mapman's avatar
mapman
22,203 posts
 
Make sure its aligned properly and give it time to break in and get used to it.
ejlif's avatar
ejlif
1,373 posts
 
check that your Vta is correct. If your arm is quite a bit higher in the back then this might be your problem. If it is closer to parallel to the platter them most likely not.
liketolisten OP
24 posts
 
Thank you for the suggestions, my pre-amp does have MM and a MC input and I have set the impedance loading at 100ohms (per sumiko)and I am using the MC input. My cartridge is close to level not up in the back, so I think my VTA is Close. What alignment tools would be the best but won't break the bank? I think it is some other adjustment - I dont understand my anti skate either.

Thanks again!
More to discover