Good Analog EQ


Looking to integrate some form of analog EQ as a temporary solution until I change my speakers (which is going to take a while).

I can appreciate that adding anything into the signal path is not ideal but I'm wondering if it might be a worthy tradeoff since I have a fairly high resolution system but am not hearing it all because of too much bass (and yes, I have some room treatment already).

If I unplug the low frequency speaker cable from one speaker I get a huge improvement in detail (but of course suffer in other ways), so I'm thinking if I get my hands on some decent equalizer I might be able to improve things.

I use digital room correction for digital sources, but obviously don't want to do this for LPs.

Thanks in advance.
madfloyd
3'8" from you to the axis of the speakers but 6' to each speaker. How did the bass improve? If this is too disconcerting try 5 feet from the back wall. This'll probably work very well for you if the other was too much.
the question is:
do you have too much even bass (meaning too much bass on all bass frequencies), and I would say we talk about sub-bass now (below 100Hz to my ears) - or do you have a few resonating standing bass-waves? if certain frequencies boom, then it´s the room/speaker-placement most likely.
if I remember right 60Hz resonate somewhere around 7-8 meters room(wave)-length.

just some thoughts...
To your original question :) . . . good analog EQs. For a great, flexible hi-fi oriented unit, the McIntosh MQ104 and MQ107 are both very good, and they're pretty cheap and plentiful used from i.e. old Mac dealers, and Audio Classics. They're a bit futzy - you do have to plug/unplug different capacitors to adjust frequency (make sure you get the capacitor kit!), but they are almost as flexible as a pro-style parametric, and sound better than many of the pro units as well.

Parametrics and DSP solutions are also frequently used with some sort of room measurement as well, and it's pretty easy to tie your brain and ears in knots by going down this road . . . sometimes a good-quality, conservatively-used graphic EQ can do wonders, for a lot less headache. For home use, the 2/3-octave style (i.e. Ashly 1502) is a good compromise between precision and fussiness.
11-09-08: Piedpiper: "It is never advisable to position speakers the same distance from both walls as it creates strong standing waves."

They do not create standing waves. It is that equal distances create interference between the direct and reflected radiation at the same frequency for both surfaces.

Kal
Kal, perhaps I'm using the wrong words. In any case, the same frequency will be supported by both walls creating a larger bump up at that frequency. The ideal is to distribute the supported room induced frequency anomalies so none get too far out of wack. Thanks for the correction.