My first "real" turntable was an Ariston 11e. Back then, I was reading about turntables in "Hi-Fi Answers". I used a Grace 707(mk11?) with an ADC XLM 3 cartridge. I got the best sound I've ever heard from a turntable with this setup. Unfortunately, it would only play for a few minutes(I think this was due to the fact that I was using a flat belt[mostly]. I also had dropped the motor, so it was more or less hanging from the top plate-that's why I am intrigued by Roxsan's implementation of a similiar system.). I think you have to use the round belt(they do sell them.). I also took the foam out of the springs, which was popular back then. It seemed like the belt pulled up the platter, so that it became a closed system(along with the arm). I was using a heavy Osawa mat. I was a poor student back then, and didn't have many alternatives that I knew about. I learned about what each parameter of the turntable, arm, and cartridge did. For instance, each of the three legs are audible-the same goes for the springs. I did combine the tweaking with a little bouncing of the platter. I believe you can hear one spring come out of one speaker, one out of the other, and the middle one goes to the middle of the soundfield. What I did learn was invaluable, and puts me in a good position today, compared to many other people-when it comes to many turntable, arm , and cartridge parameters. I guess that is how life is. What you learn seems to come in handy down the road. That, being said, with the computer, and it's access to a lot of information, you can probably do better, and you might not have time for all this. I didn't have a choice back then.
