Removing fine scratch marks from VPI plinth

Novus Polishes are what most Plastics Companies suggest to use. One can also use 3M Hand Glazes and get very good results as well.

The key with any product you use, will be always to use the least agressive product. It is better to use something like Novus #2, and use it a few times gently, rather than using a more agressive product like Novus #3, and trying to remove deep scratches all in one application. Try to resist the urge to rub hard in any one particular area, it will cause hazing-light scratching, which will be later hard to remove. Fan out from any damaged areas-scratches to blend the application.

Novus #1 is generally good for just upkeep, and placing a nice shine on the surface, removing fingerprints, etc. It contains very little, if any abrasives. Mark

You're all forgetting the cloth used can cause as much damage as you're trying to remove. Quality microfiber is the best, followed by 100% cotton. Probably better to use the cotton with the plastic polish, as it is more agressive and then remove it with microfiber. Whatever you do, avoid paper towels and polyester/cotton blends.

Thanks for the input. I think I will order some Novus. I only have some very light 'hazing scratches..looks like spider webs. I'll try the Novus and the microfiber cloths.

Right on Chayro. Good Points. Mark

High-end auto detailing sites like Properautocare.com carry pretty much all the stuff you need. They also have nice stuff for your car.