Good turntable needed, need recomendations.

Definitely buy new from a local dealer - the setup help will be valuable.

Honestly, Basis is a great recommendation. Ultimately they are a very solid product for the price, very quality engineering. I'm not as familiar with the Vector arm, but I'm sure it is good. Otherwise a Tri Planar or SME 4 or 5 would do fine. The Rhea is a very good phono, you should be all set there.

Ignore the condescending posts. You can get an OK table for $3k, just like you can get an OK pair of speakers for 3k. Tables get better as you spend more just like anything else.

Getting whatever Basis you can afford is good advice. The vacuum is not necessary IMHO, so at this stage I wouldn't recommend spending a whole lot more to get it.

If appearance is a consideration, then I would agree with the recommendation of the Oracle Delphi MKV or VI. I think the issue of a vacuum platter is important, and if you can't swing the Basis, then the Sota Star or higher will give you most of what the Basis would provide. The Sota Cosmos with arm and cartridge should come in under 10k. There may be other vacuum platters around, but I dont know of any.

An edge clamp along with center weight will provide much of what a vacuum platter does, and can be used on many more tables. The damping trough used by the Townshend Rock is a real improvement not available on other tables so you might want to look at one of those. Also, magnetic platter and tonearm bearings have great promise and are available on Clearaudio and Transrotor tables. I have a Transrotor Fat Boy and it is a very good table with strong, industrial art looks. Once you get into the range you are talking about, there are no bad tables, but they do sound different. So figure out what sound qualities are important to you, and you can trim the likely candidates to something manageable.

From the responses people give when I play vynil and what keeps me using vynil primarily over digital is the sound quality first and foremost. Appearance should be a distant second and with the value you have set out in price I cannnot think of any tables that would not meet your criteria of trophy looks.

Personally if I had that much scratch to put a vynil set up together I would spend 40% on the table and arm, 20% on the cartridge and 40% on the most important part. The phono stage!

Have to agree that a high value vynil rig set up front and center in a home theatre with the intent of selling them for 2 channel anolog would not be as optimal as a dedicated 2 channel set up for the purpose of selling anolog. To each his own but I personally would never buy a turntable of high value set up in a home theatre system for retail.
I cannot remember anyone going to look at home theatre systems and coming home with a turntable worth 10 to 20 grand.
Cheers

Good quality tables with a bit more style than Basis, check out Brinkman, Raven, and Origin Live. However, having a local dealer who will take care of setup and keeping you happy may be a better choice overall.
I purchased my table used, and learned to setup the arm and cartridge myself. I invested in the proper tools to perform the work and in my view, it is part of the vinyl experience. You may not want to be involved with that part. If you're willing to take the plunge on setup, then your options are wide open.

If your not a vinyl guy.Then I would stay away from Oracle and Linn. Stay with a table that's a set and forget. Oracles and Linn can be a nightmare to set up and they need much in setup maintenance.Just my thought on the subject.