VPI Scoutmaster Tonearms

Strngreen,

I read your response that the 10.5 arm didn't give you that much difference over the 9. I have the 9 signature with vahalla wiring and inquired to VPI about going to the 10.5i to which they said there would be around a 20% benefit in sound.
Would this be the opposite of what you experienced?My arm is on a Superscoutmaster. Thanks in advance.

Hi Moonguy....When I did the change I didn't think it was 20% better...I thought it was less. I think they both can accomodate the best cartridges made..... in my view,a cartridge upgrade if needed is money better spent. I have a Benz LPS which I think is absolutely wonderful. You will need a different rear weight if you intend to mount the LPS..Let VPI know your intentions and they will work out the weight you need.

If you would like to use a longer arm it may be easier to use an arm that will mount on the surface of the plinth. Even so it may require careful study to find an arm that is compatible. If it is still listed in the turntable sales section you should look at the custom made Panzer holz "Aries" plinth. A plinth like that could easily be used with a greater number of tonearms.

You can upgrade to a VPI Classic 2 or VPI Classic 3 arm (I did) but it will involve some minor drilling (note: the VPI Classic 3 tonearm provides on-the-fly VTA adjustment).

As for other "non-VPI' arms, you will have to drill through the plinth for the tonearm wiring unless you get something like a Tri-Planar VII Ultimate tonearm ($5,700 US).

The thing to remember with some of the VPI turntables, like the Scoutmaster, is that the "acrylic-like" material that VPI uses, gets sticky when it heats up. It sticks onto the drill bit, making it easy to mess up.

Upgrading to a 10" arm on a Scoutmaster would require drilling?