2. analog
  3. 1323616529

Anti Skating adjustment

Hi, I was reading a response to a thread concerning anti skating adjustment. I was hoping someone could give me some advise. I just recently purchased a retipped Monster Cable Genesis 1000MkII while I send my Sigmas Genesis 2000MkII for a new stylus. Anyway, when lowering the new cartridge down on a protractor the cantilever deflects left. I have checked and recheck table balance and azimuth in the horizontal plane. All appears ok. The antiskating seems not to affect the deflection while lowering the cartridge onto the protractor. I have adjust antiskating with the Cardas "balancing plateau" track as well as a Hi Fi News test record. The antiskating adjustment does impact the tonearm movement when rotating a record but not when just lowering the cartridge onto the protractor. When lowering onto a record the deflection is still there but less noticable.
The retipping appears to maybe have affected the compliance of the cartridge. My turntable is an extensively modified AR ES-1 with all of George Merrill mods with an delrin/acrylic clamp and aluminum periphery ring, the tonearm is an Audioquest PT-9.
yesfan3942
tobes's avatar
tobes
436 posts
 
I haven't tried all the 'guru' setup tips - and I definitely don't adjust VTA with the precision suggested in the article - but I found the antiskate adjustment method useful.
I've found it important to adjust antiskate and azimuth in an iterative manner. As I dial in azimuth I find I can reduce antiskate and the soundspace becomes bigger, more cohesive and the music more compelling and alive. Very small adjustments to azimuth make a difference IME (or perhaps that's due to the stylus shape I'm using?).
yesfan3942 OP
7 posts
 
I sent the cartridge with the suspected suspension problem to Peter at Soundsmith. I have verified no problems with turntable or tonearm by mounting different cartridges and they don't exhibit any problems. My original post was concerning antiskating and it's possible effect with this cartridges weird cantilever deflection when applying VTF.
Peter said that he can't duplicate the problem but it's definitely got one!
misnomer
8 posts
 
I just wanted to say a big thanks to everyone involved with this thread.

Because of the controversy I revisited my AS setup on my SME V and am very glad that I did! As others have stated, your ear and taste is the final arbiter.

For the last few hours I've been fiddling with my VTF, AS and the damper on the SME V and am more than pleased with the results! A good afternoon's work with my reference vinyl!

Cheers from sunny London!
sounds_real_audio
1,002 posts
 

I would email Audiofool and get his opinion...he knows what is the best thing for everyone.
audiofeil
4,011 posts
 
Not true soundsreally.

But I know a lot more than you.

So anytime you want to go one on one for cash anything analog, you let me know. You don't have the balls.

But if you decide to play, bring your checkbook.
More to discover