Turntable belt/pulley help- kind of urgent


So, I got a Denon DP 300F a few weeks ago. until today I didn't have a cartridge installed, so I didn't play it. After lots of hassle, I bought and installed a Shure M97XE cartridge, aligned it, etc. Then I tried to play a record but the platter would not spin. I googled the manual, and apparently there was something wrong with the belt. So I took the belt out, rearranged it around the pulleys about a dozen different ways, and still nothing. Can someone please explain to me how to position the belt so I can get my platter working??
There's a link to the manual here: http://a248.e.akamai.net/pix.crutchfield.com/Manuals/033/033DP300F.PDF

please help! any help at all would be greatly appreciated. :) (also, I'm a noob so if I've done anything stupid but taking the belt out, etc, cut me some slack).
toxicwaterfront
I don't see any phono input on the back of the amp. You might need a phono preamp in between the 'table and the amp, but I'm taking a stab in the dark here since I'm not familiar with your equipment.
Hello Toxicwaterfront, The NAD integrated has no phono stage so the input signal is to low. You will need to add a separate Phono stage or a preamp with a built in phono stage.

I would encourage you to get local help from a dealer or another audiophile as playing LP's requires a basic level of competence. I think anyone can learn this information but, at least for me, it is easier to learn by seeing.

Good Luck !
the Denon DP 300F has a built on phono stage.

"The DP-300F includes a built-in phono equalizer to connect the player to an integrated amp or receiver that does not have its own phono input."
Your Denon table DOES NOT need a separate phono stage. There is a small switch under the platter that needs to be turned ON when you are playing your vinyl. Pull the platter, check the switch to confirm it is in the ON position.
Best Regards!
And, there is never a stupid question. That is what these forums are all about.
Let us know if you get it working.
Thank you! especially @Blk25.
My turntable does come with a phono pre-amp, but I assumed it was just automatically on because they never mentioned it in the manual. Apparently, they called it the 'equalizer switch' instead, which I had turned off. Now that I've turned it on, sound IS coming from the speakers, just at a low volume (even with the volume on high), which I think has to do with the fact that I haven't properly placed the speakers. I'm going to delete my other thread (if I even can do that) and I'll let you guys know what happens.