Asr basis exclusive or naim superline+hicap2

I am considering to leave in bat A position. If battery is dried out, it will automaticly charging, and pre works in line mode.

Dear Stanwal, Never heard about 'captive cables'. Do you mean the ground by Rega which is on the left channel? BTW Rega is easy to rewire both ways: from the collar and
all the way from the headshell till the phono-pre. Then with 'line position' you mean 'current position' . Ie not in the battery position. The 'line A + B' are introduced
in the latest version if I remember well? Anyway there are also 'Auto A' and 'B' (by 2x pre) which switch from current to batteries when the signal is higher then 100 mV. This
means one 'may forget' to switch because as soon as the stylus touch the record the pre switches to batteries.

The arm leads from the Rega 1000 are hard wired to give a direct signal path from the cartridge clips to the RCAs; that is no intervening DIN plugs etc. I use a 2006 ASR; some have found it better than the new one but I neither know nor care which is better; mine does the job for me. I have sold the Naim to a friend; both worked very well on mine but the Naim was outstanding on his. I am getting a passive to try and it lacks [Horrors!] a remote so I will actually have to walk over to the system to begin so having to turn from current to battery should become automatic (I hope).

Stanwal, if you are going to a passive, please try the Lightspeed. I have a custom LIghtspeed LDR-type preamp built by someone with Georges blessing. I can't describe the difference between it and the passives I tried, except to say it's just not there. Completely transparent. I compared it straight up most recently to the Dodd Audio Battery Tube Buffer passive and mine killed the Dodd, which still sounded great, but there something about those LDRs.

I am getting a Townshend Allegri; already ordered. I have used several passives and have a couple of good ones now but I felt that the transformer coupled ones were the way I wanted to go.