Hmm. After posting the above, I decided to take a dose of my own empirical medicine and do another sound-check of my weights and clamps. I hadn't compared them since I added a Minus-K under my rebuilt Lenco, so the landscape might have change, I thought. Indeed. My Oyaide is weight-adjustable from 200g to 440g. My Orsonic clamp weighs 200g. So I reduced the Oyaide to its lowest weight in order to eliminate the sonic differences from mass alone, and focus the differences in mechanisms--spring-loaded spindle clamp v. gravity weight. Of course, the difference in materials remained. Guess what. The Orsonic clamp sounds more open and natural than the Oyaide weight. When I add more weight to the Oyaide, the bass-weight increases and the image becomes somewhat denser, but the presentation becomes less open. Syntax might be on to something. I'll have to investigate further. Just thought I'd pass it along.
Screw-down reflex clamps vs. record weights
Recently we have seen more and more 'record weights' on the market. These are normally lightweight(300-400gr)and simply sit on the record. They do not appear to give priority to bonding the record to the platter.
Two outstanding record weights of this type are the Kuzma Ebony Record Weight and the HiFi Tuning VRO ('vinyl resonance optimiser') - there is a review of this(for those who read German) at www.fairaudio.de.
It appears that these clamps, rather than channelling disc resonances away through the spindle and main bearing and/or optimising contact between the record and the platter surface, seek to absorb them directly (i.e. into the clamp itself).
The Kuzma Ebony is a particularly interesting case since it has been introduced by a company that supplies screw-down reflex clamps as standard on its high-end turntables.
My question is: has anybody had any experience of these clamps - probably 'vinyl resonance tuners' is a more appropriate term - on their turntables as replacements for screw-down reflex clamps? Clearly as a way of dealing with warped or dished records they will not be of much use, but it may be that they do a better job of damping the disc.
I would be particularly interested to hear of experiences involving SME turntables (whose platters incidentally are covered with a bonded layer of 'Isodamp' damping material).
Thanks,
Peter
Two outstanding record weights of this type are the Kuzma Ebony Record Weight and the HiFi Tuning VRO ('vinyl resonance optimiser') - there is a review of this(for those who read German) at www.fairaudio.de.
It appears that these clamps, rather than channelling disc resonances away through the spindle and main bearing and/or optimising contact between the record and the platter surface, seek to absorb them directly (i.e. into the clamp itself).
The Kuzma Ebony is a particularly interesting case since it has been introduced by a company that supplies screw-down reflex clamps as standard on its high-end turntables.
My question is: has anybody had any experience of these clamps - probably 'vinyl resonance tuners' is a more appropriate term - on their turntables as replacements for screw-down reflex clamps? Clearly as a way of dealing with warped or dished records they will not be of much use, but it may be that they do a better job of damping the disc.
I would be particularly interested to hear of experiences involving SME turntables (whose platters incidentally are covered with a bonded layer of 'Isodamp' damping material).
Thanks,
Peter
- ...
- 38 posts total
- 38 posts total