Home made cable lifters.

Mmakshak, Elusive Disc and others have utilities insulators for sale. They look like what you see on most telephone and electric poles. All I can say is that I have some of what RightWay Audio used to sell and they sound better than those I found outside my local utility in the discard pile.

I used to have access to a gas high fire kiln and have found pots that I made then to be good under cables, but my wife objects to their use on the floor.

Groovey, I have wood plank floors and have no radient heat. I find it imperative to raise the cables. I don't know about the ceramic hooks. All I can suggest is to try them. The cables would still be very close to the wall surface, however.

Just a couple of more observations about the fishing line to cable interface I described above (11/16).

All other approaches recommended so far have some dense material between the cable and floor, and this can restrict the formulation of the lower portion of the sound image between the speakers. The line to the ceiling gives the maximum clear space for the image to form.

Even more important, the fishing lines work especially well for classical music since the cables are suspended on strings.

Shunyata's reference systems cable placemnt can be seen at the bottom of this page

Interview with Mr. Gabriel

One picture is worth a thousand posts

Best regards
Groovey Records

Listening to The Who Live at Leeds Decca Track Records American Vinyl
Maximum R&B

I recently noticed that my cables were laying side by side with my cable TV cable running on the floor behind my entertainment system. To life the speaker cables off the floor I used plastic cable ties which I stapled to the back of my cabinet. They are suspended in midair by just one tie in the middle of each cable.

Made a big difference in the quality of the cable TV signal - reduced noice and artifacting. Not much difference in sound system!!

I lost my thread. To keep it short, listen to Zargon's last post. In fact, I'de like to ask Zargon if he has had any experience in lifting power cables?