Home made cable lifters.

Shunyata's reference systems cable placemnt can be seen at the bottom of this page

Interview with Mr. Gabriel

One picture is worth a thousand posts

Best regards
Groovey Records

Listening to The Who Live at Leeds Decca Track Records American Vinyl
Maximum R&B

I recently noticed that my cables were laying side by side with my cable TV cable running on the floor behind my entertainment system. To life the speaker cables off the floor I used plastic cable ties which I stapled to the back of my cabinet. They are suspended in midair by just one tie in the middle of each cable.

Made a big difference in the quality of the cable TV signal - reduced noice and artifacting. Not much difference in sound system!!

I lost my thread. To keep it short, listen to Zargon's last post. In fact, I'de like to ask Zargon if he has had any experience in lifting power cables?

I placed cardboard under all cables raising all cables in minimum of about 2 inches. That and seperating all cables including power had a dramatic difference on top end extension and seperation of instruments.

I wholeheartedly agree with clipsal. Just bend small pieces of cardboard into v-shapes. Notch them if you want to for greater cable holding stability, set them on the rug or floor, with v-shape pointing toward the floor, and place the speaker cables on the tops of the inverted vees or in their notches. The difference in sound quality can be heard easily. I tried the same with interconnects, but detected no differences in sound quality; however, system experiences may vary. In any event, costs nothing.