Speaker cables.. Budget again.. With a twist...



Hi..
I have already broken the bank on my system, Plinius 8200 int. amp, Marantz CD 6000OSE, Vandersteen 1c.. I guess I may use zip wire from Home Depot.. The problem...(the twist) is that I need to run one length 35 feet or so.. The other length will be maybe 20 feet.. No other way around it.. Plus I I cant really spend much more that $125 $150 max... What is my best option..? Zip wire? Or can I somehow "make my own" cable.. I am willing to buy all the parts and solder it up.. DREW
thefish2
If your speaker runs were not so long, I'd suggest 16 gauge Furutech Fs71144 cable at around $4.60 a meter from Partsconnexion. But 35 feet is awfully long for that gauge. I've recently used Monster Cables new 14 gauge cable you buy for a dollar a foot at BestBuy (the stuff wound around a plastic core.) I needed something to get me by while I was using a loaner amp that wouldn't accept the connectors on my regular cables. I was quite impressed with them for a buck a foot. Timru's suggestion is a good one. Their Belden 5000 series is more in line with what I'd be looking at in your price range/length, it's either 10 or 12 gauge.
Try the White Lightning DIY recipe as described in 6Moons:

http://www.6moons.com/audioreviews/whitelightning/moonshine.html

You can buy 2 bundles of 40 ft. cord at Wal-Mart for around $20. Then get some connectors and give it a whirl.
Go to:

www.diycable.com

Order the required length of "Canare 4S11" wire and the required number of Exodus "EX_BANA" banana connectors (yes, $5.25/pr but worth it).

This should fall just within your budget for the two cables of 55 or so foot combined length.

The bananas require a small jewelers/opticians/electronics screwdriver and, obviously, a wire cutter/stripper is needed. No soldering. The Canare wire is very high quality.

You can do much worse than these speaker cables. Twin 11 ga for both hot and neutral will serve you well, given the lengths needed.
Personally looking at the lengths of of cables I would go with 2 35ft cables. The reason - I have played with cable lengths and personally found that when you exceed 50% of the shortest wire I hear a slight reverb/echo sound which to me throws off the imaging and soundstage. I will admit when I first heard it (but I had junk equipt. and never heard imaging and soundstage) I kind of liked it. Today 30 years later it drives me crazy. I also ran unterminated speaker cables for over 20 years. I did strip back the wire by approx 3" every 5 years because of a slight oxidation. That could save a few bucks. Now I'm sure some will argue with me about lengths but again thats what I hear. With HT some processors will let you adjust the delay to compensate for the different lengths but thats typically a delay between front and rear channels.

Now to your question regarding cables - you are looking at approx $2 ft with 2 35 ft cables. Look for some closeout audioquest of maybe kimber 'bulk' cables. I would also look at the heavier gauge wire too with those lengths. Also if you do go with 2 35ft cables DO NOT coil up the shorter cable run (you just made a small transformer).

Depending how critical of a listener you are I (personally) find better speaker cables - interconnects - and lastly power cords will bring another notch up of detail, air, blackness, soundstage, depth and imaging. You have a nice system so far and cables is something to 'save' up for.

These are just my personal opinions. Good luck in your search and happy listening.
When I had to run cables that length, I built them like the "White Lightning" using a 100ft Home depot yard extension cord. It's yellow, the same mfg as the orange one but 12 gauge wire (I think the orange one is 14 gauge). It worked nicely and as I recall cost me ~$45 for the 100 ft cable. I terminated it with bananas that can be found in any style on ebay or you name it.