Wow, a thousand bux for 10 feet of speaker cable? I find it hard to understand how that last 10 feet will mitigate the thousands of feet of cabling that were used in the original recording, mixing, and mastering phases. However, if that cable has been cooked properly, perhaps you can, indeed, mitigate the sonic holocaust that was introduced during the production stages.
I know that I was greatly releived to read the following:
RAPID, SUPERIOR BREAK-IN AND CONDITIONING ... conditions more thoroughly because the cabling is exposed to extreme signal levels and a special waveform that does not occur in normal system operation.
I am sleeping much better at night knowing that my cables have been greatly enhanced by the use of signals which will never be seen during normal operation. I guess it's kinda like improving the performance of my Mini Cooper's internal combustion engine by burning thru a tank of avgas every once in a while - whew!!
But let's get back on-topic: Personally, at first I was *very* concerned that I might damage my cables' fragile electrons by making them carry a signal for which they were never designed. Not to mention asking them to move both backwards AND forwards during playback.
And, when you really think about it, this is even more deeply troubling if said cables are directional - what would it do to the depth of the soundstage if I forced a forward-moving electron to suddenly come to a screeching halt and then have to move backwards? Wouldn't this leave behind little electronic skid marks inside the cable?
And, again thinking logically, wouldn't this cause a "smearing" of the sound as the remaining perfectly good electrons have to slow down and then go out of their way to avoid these sheared-off bits? Also, is it easier to avoid a 1 or a 0? I'm betting the 1s are easier to avoid, they are a bit narrower.
Nonetheless, *surely* this would cause the signal to slow down much the same as you have to slow down when trying to avoid all those bits of tire thrown off by an 18-wheeler when one of its tires explodes. There is NO way that could be good for the clarity and cleanliness of the original signal, that's for sure!!
I tell ya, this electricity stuff is downright scary to anyone who takes the time to really sit down and analyze it scientifically...
-RW-
I know that I was greatly releived to read the following:
RAPID, SUPERIOR BREAK-IN AND CONDITIONING ... conditions more thoroughly because the cabling is exposed to extreme signal levels and a special waveform that does not occur in normal system operation.
I am sleeping much better at night knowing that my cables have been greatly enhanced by the use of signals which will never be seen during normal operation. I guess it's kinda like improving the performance of my Mini Cooper's internal combustion engine by burning thru a tank of avgas every once in a while - whew!!
But let's get back on-topic: Personally, at first I was *very* concerned that I might damage my cables' fragile electrons by making them carry a signal for which they were never designed. Not to mention asking them to move both backwards AND forwards during playback.
And, when you really think about it, this is even more deeply troubling if said cables are directional - what would it do to the depth of the soundstage if I forced a forward-moving electron to suddenly come to a screeching halt and then have to move backwards? Wouldn't this leave behind little electronic skid marks inside the cable?
And, again thinking logically, wouldn't this cause a "smearing" of the sound as the remaining perfectly good electrons have to slow down and then go out of their way to avoid these sheared-off bits? Also, is it easier to avoid a 1 or a 0? I'm betting the 1s are easier to avoid, they are a bit narrower.
Nonetheless, *surely* this would cause the signal to slow down much the same as you have to slow down when trying to avoid all those bits of tire thrown off by an 18-wheeler when one of its tires explodes. There is NO way that could be good for the clarity and cleanliness of the original signal, that's for sure!!
I tell ya, this electricity stuff is downright scary to anyone who takes the time to really sit down and analyze it scientifically...
-RW-