2. digital
  3. 1390867634

Femto clocks ,every unit should have one

I was reading in Computer Audiophile even the .$400 Geek pulshas a a Femto clock. It is inexcusable for any credible company to not consider a Femto clock they are 1,000s of times more accurate then a a Pico master clock. We are speaking of a a Trillion times ,vs millions.
More accuracy ,equals less jitter more refined ,better resolution.
These clocks were several $1,000s a few years ago . Now a .085 Femto clock maybe $50 and made in the U.S.A the Geek puke use this.
I bought so Wyred SE dac then realized it has far superior low distortion parts but over looked a major part,the new kid in the block the Femto clock.i have been asking them to upgrade this dac most far no response ?
Why .they still have a lot of old pico clocks they want to off.
If buying any new dac a Demand a a Pico clock.BTW the vega dacs parts are not as close tolerance as the wyred SE dac,but it does have a Femto clock. Wyred needs now to step up to the plate .it sounds very good
It could be that much better with this clock.
audioman58
audioman58's avatar
audioman58 OP
4,299 posts
 
Steve your products are always very good,my uncle is a digital audio engineer
And he said any quality engineered product she easilly be able to implement a Femto clock if it is same size .Steve on a new Femto clock how many hours if any for breakin ? .
audioengr
3,282 posts
 
Audioman - implementing a working femtoclock circuit and actually achieving really low jitter at the system-level are two entirely different things.

Break-in has to do with power supply elements, such as capacitors in the decoupling and power regulation. Usually an overnight run or a day is sufficient for these electrolytic caps.

Steve N.
Empirical Audio
chayro
3,022 posts
 
It never ceases to amaze me how some people just jump on the latest advertising buzzword bandwagon. The Sabre chip, the diamond tweeter, the ceramic driver, the teflon cap. All of these things may well be fine products, but as Steve N. points out, it is the implementation of the the "thing" that counts, not the mere fact that it's there. Virtually every manufacturer tries to find something they can advertise as instantly translating into better sound, but experienced audiophiles should know that it just doesn't work that way. They should know, but obviously some people never learn. Oh well...
nonoise's avatar
nonoise
11,096 posts
 
Implementation has always been the key. Look at silver or copper wires. Why do they sound so different? Implementation.

Another case in point is the latest John Darko review over at 6moons on the Antipodes DS Reference server/streamer. The ways it's "implemented" supposedly obviates the need for high priced DACs and USB cables. John claims that he gets the best sound he's ever heard just using the Schiit Bifrost DAC.

All the best,
Nonoise
audioengr
3,282 posts
 
NoNoise - Silver wires are even more dicey that you can imagine. The metallurgy and treatment are critical. Copper is much easier, but the performance of silver is better assuming good implementation.

The Antipodes server I have used at shows. It is really excellent. Cannot recommend it highly enough. I use it with USB, which puts the master clock inside my DAC. John D. should upgrade his DAC IMO.

Steve N.
Empirical Audio
More to discover