Power cord or conditioner for ARC VT100?

Try a resonable power cord before upgrading. I've built a couple dozen of the Bob Crump design DIY power cable and it really rocks for the $$$$. You can buy a built one for less than $50.00 and if you later want to try more expensive cables at least you have a quality reference to start with.

Ohh... please spend some money on grounding your system and changing your outlets. You don't need to spend a lot of money. Get the Pass & Seymour 5242 outlets and hire a electrician to run a ground to the fuse box. I would also recommend upgrading your house ground with 2 or three grounding rods. If you have the old alluminum house wiring you might ask how much for improved Cu Romex.

Please, before you purchase anything get those outlets grounded! The line cord and conditioner are absolutely useless without a good ground at the outlet. It could potentially be dangerous also.

I hae tried the King Cobra on my VT100 MKII and the results were excellent. The KC was the only power cord that I tried that I preferred, overall, to the stock cord. Other power cords such as the Black Mamba, Electrglide,Audio Magic Illusion and ESP outperformed the stock cord in some areas. However, on balance I preferred the stock cord. But, I could not justify spending $2000 on a power cord. So, I ended up with a RGPC for about $500. I plugged my PH2, LS25 and VT100 MKII in the RGPC. The improvement in the overall musical presentaion was signifcant. If cost is a factor, I would recommend the RGPC