Who makes a pre/pro with SACD Input?

For a bit more, you can look at used Classe SSP30's. Nice analog section, 6 channel inputs, good A/D and D/A sections, etc.

To add my two cents. In an effort to simplify what you might be looking for, look for a processor that has "analog pass-through" capabilities. This would allow the signal from the SACD player to flow directly to the volume control of your processor. This would preserve the use of the Sony DACs. Of course, if you purchase a $3000+ processor, the DACs in the processor will most likely be superior to that of the Sony in which case you would want to use the digital output on the player. Processors with analog pass-through are likely to have more bells and whistles because they skew more towards state of the art, it's the nature of the beast. A processor such as the Classe SSP-30 while having plenty of features focuses more energy and design to sound quality therefore it might make a better choice for you, if it's within your budget. It retails at approximately $3000 new.

I have had personal experience with some of the proceesors above. The Integra Research ($4500) is an excellent unit and I owned the Rotel 1066 ($1499) for a year before trading up to a Krell Showcase ($4000), these units are excellent as well. The Rotel may very well be the best value in HT utilizing features found in much more expensive components. Sound quality is very good though not as good as Classe, Integra and Krell but certainly nowhere near as expensive.

I would suggest you audition a Rotel and move on from there. Most of what I stated had been stated before but I thought saying it a different way might help reinforce the information. And I hope that it helps you.

I just bought the Outlaw Audio Pre-Pro. It is $799 new and you can try it out for 30 days to see if you like it. If not, then you can return it. It has analog pass through for your sacd player. I have nothing to compare it to, but I liked the price. I could not find a "best" processor in the $2500-$3000 range. The technology and models have been changing. This allowed me to set up my new system. I am still in the process. Good luck

Q#1)Why is it necessary to have a seperate processor when the Sony DVD SACD has decent quality DAC'S allready?

Sometimes DECENT just isnt good enough. Not to mention that seperate DACs that decode SACD/DVD-A as well as SACD/DVD-A players that put that signal out in the digital domain, are few and far between....Theta's Gen8 DAC does decode SACD, but thats the only one I know of. I read of a DVD player that puts out the digital signal but I cant remember for sure, I think it was a Phillips???? Slipknot1 explained the current situation well, but for reiterations sake, most DVD players (except the afformentioned Phillips??) ONLY put out an analog SACD/DVD-A output.

Q#2)Would it not be better to have a preamp that just controled volume and seletable source switching for audio and audio/video components?

BETTER is a POV question, for you I guess yes, for me no. I prefer my proccessing in one tidy box, except for CDs and I prefer my old Theta external DAC.

Q#3)Is the reason for a additinal processor for Dolby decoding for a VCR,satelite receiver or HDTV audio signal?

In general yes. Typically for the DD and/or DTS available from DVDs, plus a few surround matrix modes as well, of course only if desirable.

Q#4)If so,are there units that allow you to use the processor for just these functions?

Of course, an input, typically called a 5.1 analog bypass is used for SACD and DVD-A. Rotel, B & K, Krell, Integra, Sunfire, Bryston, and Classe, just to name a few, all make pre/pros that accept 5.1 analog inputs, plus a host of other user selectable modes. For the most part, most if not all, NEW pre/pros offer this input.

On your system you named a TV, an amp, a source, some speakers, a VCR, and a TV tuner.

1) Where is your volume knob currently located? As far as I know that source doesnt have a variable volume, e.g. Cary 308.

Thats the piece a pre/pro could/will replace.

(of course I did not mention the possibilty that you could use a preamp inline between the pre/pro and amp. But that brings up a host of new questions, such as, unity gain and theatre pass through. For these answers look at the threads named "PLease explain preamp theatre pass through," and "Seperating 2 channel and HT in the same system.")

I have just upgraded to a Bryston SP1.7 which has the 5.1 input, the Rotel RSP-976 I had also had these inputs. I have a Sony DVP-ns900v DVD/SACD and I am enjoying it, so my new pre/pro HAD to have this feature. The Rotel will probably be up for sale here, in a few days. Just in case your interested WINK WINK.