Thorens 125 MkII: MM or MC cartridge? What's diff?

Thank you for spending your valuable time to teach me the basics involved in tt reproduction of sound. I really appreciate the information as well as the effort you all provided. As far as tone arms go, I believe I have an SME replacement arm. Not sure what model, but the cool guy who sold the Thorens unit assured me he knew what he was doing. I haven't set up the unit yet because I don't have a dustcover, and I don't think my inexpensive stereo rack can support the tt. But my vinyl collection continues to grow, through donations and shopping sprees. Can't wait to set it up. If I put up a WTB for the cover, what are they worth? Sorry to stray from the topic. Thanks again,
Steve

Hi, Steve:

Glad to help. We were all virgins once (some of us a very long time ago, and we may have forgotten how it felt...).

If I were re-writing my post a bit, I would have made the point to say that in an audio system that has an analog front end, there are two sets of transducers (a device which converts energy from one form to another): the phono cartridge (which converts the motion of the cantilever into an electrical current), and the speakers (which convert the electrical/audio signal back into the motion of the cone/panel/ribbon, thereby creating sound waves).

Transducers are the most problematic items in the audio chain, since they are subject to non-linearity and other forms of signal distortion and anomaly. Hence, it should be no surprise that cartridges and speakers have such significant differences from one brand/model to another. Just as people buy speakers that sound best to their ear, so with cartridges...

I mentioned in my first post that the tonearm/cartridge combination has a resonant frequency. This is because the cantilever acts like a spring. The cantilever shaft passes through a suspension system -- think of it like a rubber donut -- and as the cantilever moves up and down, and side to side, it interacts -- like a spring -- with the tonearm.

Let me close by adding that the Thorens turntable line is a very good one. The audiophile community tends to be a bit snobby when it comes to turntable brands, but the Thorens models offer a lot of performance for a reasonable cost -- not to mention some convenient features that many high-end turntables lack (such as easy changes from one speed to another). If you want to buy a dustcover for your turntable, you should be able to get it for $25-40 used.

I have one question for you in return: do you have an entire SME tonearm assembly, or just a replacement arm tube? If the former owner threw in an entire SME tonearm, you may want to seriously consider replacing the stock Thorens arm with the SME, which is much better arm. If you want to discuss this more fully, please let us know which SME tonearm you have.

Enjoy, and good listening to you.

Scott C-

Actually the TP16 arm on a 125 mkII is a great arm. The SME is a good arm also - there is more panache to the SME (probably a type 3) but many prefer the stock arm.

Steve: You probably have a version of the 3009 arm, or if you are lucky a 3012 (12"). The Sure "V" that you have should sound very nice, on either, if it is in good shape. Might be best (as mentioned above) to just replace the stylus (if this is even needed) and listen to it "as is" cartridge wise for starters (these combo's are quite good). In your situation I would upgrade the IC's (just the interconnects - not the tone arm cabling) if this has not been done. Also, if it has the stock Thorens rubber mat, a Linn felt mat is a big step up. A felt mat will not only improve the sound (on Thorens) but will also cut down (considerably) on static build up. I am currently using a Thorens TD165, but did the above to a TD160II in the 80's (this one had the 3012 arm, Linn mat and your exact cartridge). Though the TD165 is a budget table (and me being on a budget:-), I have still replaced the IC's with 47 Labs OTA cable and made a DIY felt mat (even on this table - much better sound). I have not gone into setup (also crucial) and you might try researching this @ Audioasylum.com in the Vinyl Forum. Good luck and have fun.

Scott: Dekay is right. If I remember correctly, the SME arm is a 3009. And when I said that I hadn't set up the "unit" yet, I hope I wasn't unclear: I meant hooking up the whole turntable to my system, not the tonearm -- the SME is already installed. I think the guy who sold the Thorens to me may have included the original tonearm as well, but it's all packed away in storage right now so I can't quite check.

Dekay: when you suggest the Linn felt mat, you mean the mat that the record rests upon, right? Where can I find one and how much can I expect to pay? I think I'm still kind of incompetent at DIY stuff, even if it only involves tracing a circle on felt and cutting it out. You suggest upgrading the interconnects, as well. I wasn't given any in the package, but I've been saving a Coincident IC that was recommended to me when I had more cash available. Do you think this cable would be too unflatteringly neutral for the Thorens? Are there any ICs usually mated with Thorens? I'll ask Steve at the Cable Co. next time I talk to him, too. What I'm really concerned about are the female RCAs on the TT: They are old, and not gold plated. Where can I go to update these connections? Lastly, the ground wire has a few knicks and cuts in its shielding, and if I remember correctly, some wire is exposed. Does it matter sound-wise if I just wrap some electrician's tape around these spots, or would you recommend replacing the wire entirely? Would radio shack wire do the job _well_, or are there proven audiophile ground wires, too?
Thank you all very much for your input.
--Steve