2. analog
  3. 1037093707

more help with vinyl..

I posted on 11/02 and maybe one step closer to understaanding the complexity of tt's and music it produces. I have an old pioneer PL-516 with new belt & cartridge & 50 mostly used lp's. New Yamaha ax-596 amp with Paradigm speakers. 90% of my albums have much surface noise---pops etc.....newer stuff(mid-80's?) pop...that looks unplayed is ok. I bought the diskwasher system...no help. 2 weeks ago bought a great Ellington album.'59...looked great ..did the dw system again & again...only got worse.! I bought 2 new albums...played on my Kenwood system (new-2 years old and Pioneer PL_516) great! The Ellington record sounds bad on both systems...took the record to dealer in Spokane...auditioned Pro-ject 1.2....had seen reviews ..it sounded better but still bad. I bought the pro-ject 1.2 and will add a new cartridge (grado red) in about 6 months after I get this tt thing and vinyl figured out. I don't want to spend the $450 for machine but had hoped to save the 40 plus albums and restore them. It looks like I have to buy virgin or near mint records but most in second hand record stores look ok but still may sound poor (on my system)..am I right on this..? If this is right then I can only buy on internet or pay big $ for new records but at that cost maybe I should go for the convience of SACD, HDCD, etc. the cost differnce is not much over perfect LP"s. But once you hear great vinyl all your cd's sound so limited. Maybe the problem is I'm trying to do this on the cheap...? How do you get good vinyl sound for only $5-$10 per record...can you do this on my tt's...? HELP! What can I use on my records to restore sound..? anything..or give them to goodwill..? It doesn't seem to be a tt problem..a condition of my vinyl..? How do I keep my new ones from going bad...? I'm starting to get anal about this like you other guys...save me before it's too late...!
dla405j
Post removed 
sc53
720 posts
 
I think a bunch of people recommended this to you in your earlier post, but still it's worth saying again--before you spend any more money on new equipment, cartridge, or even albums, BUY A RECORD CLEANING MACHINE. There are a couple of models available and they do turn up used here and on eBay. You will never get the most out of your record collection, new or used, and your equipment, budget or state-of-the-art, until you start vacuum cleaning your LPs! Of course cleaning won't remedy damaged LPs, but much surface noise can be reduced if not eliminated by even one sweep on a VPI 16 cleaning machine. It's worth the expense!!
blkadr
739 posts
 
Some albums will always sound bad, even when new. This is still a very cost effective way to aquire music. Last night I went to my local "Manifest" and picked up four albums for $18. One new "cut-out", two near mint and one $5 loser (good return policy). 18 bucks will buy you one cd at your average chain. On "88 Basie Street" the sound is so good I cant imagine doing better with the new cd, worth $18 alone.
As for surface noise, a used VPI 19jr is about the cheapest way I have heard to get that quiet background without spending a fortune. Easy to mod or upgrade too. Bad pressing will never sound that good but its still the cheapest way and you can find some real gems that make it worthwhile.
hififile
236 posts
 
Check out gruv glide. It works very well for me on old used vinyl, and I buy a lot of old records.

Sc53 is right on with using a cleaning machine too!

Look under "G" in the manufacture listings here on Audiogon, and it will take you to their web page.

Great stuff, very reasonably priced.
shersta
140 posts
 
It sounds like you're looking to get the most out of your current set up and are not looking for upgrade advice. With that in mind:
1) I'll second Viridian's suggestion to experiment w/ cheap/free tweaking and Phild's suggestion to get the disk doctor kit (which runs about 70 bucks). After cleaning, you should place the lps in new sleeves (AudioAdvisor sells pretty good sleeves--20$ for 50. Keep your stylus clean with the strike-strip on a book of matches--free! This is a hundred dollar investment that will get your lps _nearly_ as clean as an expensive VPI machine for a fraction of the cost.
2) Consider building some kind of isolation platform for your table. There are plenty of good ideas on the web.
3) Vinyl is a pain. Will your current tt be as quiet as your cdp after you've done the above? No. Will it sound different? Yes. Is the difference important and significant enought to justify the time, energy, and money you're sinking into analog playback? Have fun.
More to discover