Depending on the length of cable or even not for that reason but some transports do not put out strong enough signals to clock in to certain DACS and need a booster hooked up between them . I have experienced this with my Kora on some transports. A Monarchy Dip or in my case the GW Labs digital booster fixed the problem. Audio Advisor has them and I guess other places also. See if you can get your money back on a trial if this does not solve the problem. Of course, as stated, you may also have a defective DAC.
No signal lock on my new used Adcom DAC
Just received an Adcom GDA 600 DAC with mods, which I purchased from a fellow Audiogoner. I have a good coax cable on order, but decided to go ahead and hook it up to my Denon DCM 370 changer with a Monster Interlink coax cable which I had on hand. The Digital Frequency Lock LED will not light up and not much sound comes through the right channel--in fact there is a lot of distortion coming through that channel. So, it appears that the DAC cannot lock a signal from my transport (the Denon DCM370 changer). Is this possibly the Monster coax cable? Or am I going to have a compatibility issue with the mods on the Adcom DAC? These include:
Existing dual Burr-Brown PCM63P 20 bit DACs piggybacked with high performance Burr-Brown PCM63P-K 20 bit DACs (4 DACs total).
Dual LC Audio AD825 OP AMPS installed.
Any help would be appreciated.
Existing dual Burr-Brown PCM63P 20 bit DACs piggybacked with high performance Burr-Brown PCM63P-K 20 bit DACs (4 DACs total).
Dual LC Audio AD825 OP AMPS installed.
Any help would be appreciated.
- ...
- 5 posts total
| Post removed |
- 5 posts total