$10 / foot speaker wire


I'm looking for decent speaker wire for about $10/ft. I've ruled out Analysis Plus (tizzy, Kimer (bright), Goertz and braided high capacitance designs. Looking at:
* DH Labs Q10
* Mapleshade clearview golden double helix.
* Audioquest Type 6 from Audio Advisor.
* Luminous Audio Technology (LAT) spiral wrapped 18 gauge.

Are any of these any good for transparent, neutral sound? Is there something better?

Thanks
cdc
I guess it's all relative. I have the Eichmann Bullets currently in use. 47 Labs wanted $100 for enough connectors to make a pair of ic's with their OTA (and it may well be worth it, I don't know as I didn't want to shell out the money knowing the 47 Labs connectors can very easily be broken). I replaced a pair of budget Ultralink RCA's on some 47 Labs OTA

http://www.ultralinkcables.com/products/productsList.php?category=ad00

with the Eichmann's and it was no contest. When you look at the cost of the Cardas and, especially other well know RCA's like the WBT's, $30 for the Eichmann's strikes me as a bargain, particularly when the OTA terminated with the Ultralinks was very competitive with Silver Audio 6.0's terminated with the WBT RCA's. The Eichmann/OTA combo was audibly superior. I think the copper Eichmann's are a bit of a bargain.
Miser:

I was able to locate two packages of the RS RCA's that I use yesterday. The price has gone up $1 per pack and the stores said that they do not know which version will arrive with the next shipment from their warehouse.

Both shops had stored the cheap RCA's in black plastic sliding drawers (I had to ask for them). Don't know how standard this is from one RS to the next, but they were no longer hanging on the peg board in either of our local RS's as they used to.

Less contact area makes sense to me (the same principal as replacing the heavy jumper bars on biwirable speakers with wire/cable) and the end/all is the elimination of unecessary chunks of metal in the signal path. Sounds good in theory and according to the experiments that I have made it also sounds good in reality.
Dekay,
How much of the outer metal housing do you cut off? I can see ditching the strain relief tab, and soldering the ground to the outside of the ring, but if the ring is cut back, it must be hard to keep the plug intact? I was just using them pretty much straight, but without the plastic cover. Still not much metal mass there.
Cdc-- I usually pick it up in Europe when I come over. Their US importer is in Californian, but I get the idea he likes car stereos. I am over here now and am bringing back almost 100 feet for some other people. It sells for 10 euro (now about $12 per meter). I will be back this weekend. I have a pair of 9 footers if you want to try them. Let me know.