Pure Note Cerulean

Interested in your review. They blow away the Epsilons IMO.

Sonic Genius' Reference Stereo System a/o February 2004:

Martin-Logan Prodigy speakers.
Krell FPB400cX power amp. Modified with IEC power inlet.
Krell KCT preamp.
Sony SCD-1 SACD player.

Sutherland PHD phono preamp (battery).
VPI TNT-HR-X turntable, JMW 12.5 tonearm.
Grado Statement phono cartridge.

Pure Note Cerulean Cables interconnects and speaker cables.

Sonic_g,
Are you also using the PNs between your VPI and Sutherland? (RCAs, I would guess.)

What have you found to be the biggest difference between the Epsilons and Ceruleans in general?

I have all Epsilon 4s in my system except speaker wire, VPI-to-Ono and digital cable. (I have an 8 meter run of PNs between the pre and amps).

Thanks for your consideration.

System at the present time:
VPI TNT V / JMW 12.5 / XYZ 1000 Airy
Pass Labs Aleph Ono
Wadia 23 (used as transport)
Audiomeca Enkianthus Dac
Panasonic SV-3800 DAT
Nakamichi ZX9 cassette deck
Pass Labs X1 pre-amp
Bryston 7 Bsst
B&W Matrix 802/S III on Sound Anchor stands
Velodyne HGS 18/II
Acoustic Zen MC2 digital cable
Pure Note Epsilon v.4 XLR/XLR
ELF cable RCA/RCA (TT to pre)
ELF Silver Reference (you HAVE TO hear these! Price-to-sound ratio is extraordinary in my setup.)
Signal Cable and JP cables Maximum Gold power cords
Powervar ABC 1200-11 power conditioner (for digital gear only)
Powervar ABC302-11 (analog gear)
Dedicated 20 amp lines

I originally used the Siltech VPI-Sutherland connection, now the Cerulean which is very detailed and musical. Epsilon Ref. did not work well here.

The Epsilon Refs V4 were very good cables until I heard the Ceruleans. There is no comparison IMO. The Cereulean sounds like a different cable, like the difference between live and recorderd music. I wish Pure Note had made the Cereuleans first but I guess that is progress.

Pure Note tells me the Cereulean cables were developed in-house and is a complete departure from the Epsilon.

Sonic - I know you are very familiar with pure note and are now using cerulean. I sent Tom a question about cookers and haven't heard back yet. I am thinking about giving them about 24 hours of treatment instead of waiting 100+ hours to hear difference. My transparents are well broken in and am not sure how long it will take to hear tonality. Would like your advice.

I have not found the AH cooker to speed up time on cables. Some will argue the current is too high for interconnects. I no longer use one. I just listen to my discs and enjoy better sound over time as the cables burn-in.