Audio Aero Capitole MK II: Performance & Problems

I can't understand why some people are selling their MKII's after only a few weeks. Remember, it takes at least 500hrs to get a good feel of what the player is capable of.

Tube life / Replacement Question -Capitole MK II.
I've owned my MKII for about a month now, with zero problems, and I love it. But I have a question. I notice, that when I have the unit in Standby, the tubes are still on. The expected tube life is 10,000 hours (roughly 14 months). Shouldn't the tubes be off in standby to preserve tube life? If the answer is to shut off the whole player - wouldn't it would take many hours to warm-up the player again from a cold start?
If a tube goes bad, how do you replace it? Isn't it hard wired into the circuit (ie, no tube socket)? And, no, I am not a technician, so I wouldn't trust myself with a soldering iron in my hands, working on a piece that retails for $8700 (U.S.). Anyone got any knowledge / advise? (Oh, and one last thing, I have no local dealer to go to).

I believe standby mode in tube amps usually refers to removal of high voltage to the plate and screen/control grids. The heater usually remains on which is the visible glow you see. You have the benefit of thermal stability without the degradation caused by high voltage stress.

Thanks for the response, Lwatson! If the heater remains on, couldn't that also fail prematurely due to it's constant 'on' state in standby? Or, in other words, does the 10,000 hours of tube life refer to 10,000 hours of actual use (ie, while actualy listening to the unit)?

Louisl: I understand that the 10,000hrs refer to the duration the unit is powered on (the back switch), irrespective of whether it is playing music or not. If you read the manual carefully, it mentions somewhere that if the unit is not in use for a long time, to maximise the tube's lifetime, the unit should be powered off.
I suggest that you send an e-mail to Mr Combelles and ask him if the tube can be replaced by the user, and let us know.