2. speakers
  3. 1062434158

B&W Nautilus 803 & Musical Fidelity A3

Hi all.
I've recently upgraded my hi-fi, substituting the B&W DM570 with a pair of Nautilus 803. The amplifier is a Musical Fidelity A3. I've some problems about this combination. I've gained in a lot of aspects (clarity, frequence response, smootness), but I've lost in the soundstage, that is not defined as well as the DM570, especially with music containing a lot of instruments where the sound is a bit "jammed" (I like rock, jazz, but also classic music). After a lot of experiments about loudspeakers positioning, I think this could depend on the amplifier, that has not enought current to drive the loudspeakers.
Is it true? Have someone some results about this combination? Could be the upgrade to a Musical Fidelity A308 a good solution? Or are there other best combination in the same level of price ($2000-$3000)?
Thank you in advance your useful tips!
128x128pinox67
steve_jsd
15 posts
 


Do you mean the A3 integrated or the A3cr power amp? i have the 803's with the A3cr on top (trebble) and A300cr on the bottom, and the biamped combo sounds a lot better than just the A3, especially at higher volumes. I have heard the 308, and it also sounded very nice.
brianmgrarcom
1,317 posts
 
I believe it is the N803's, I just swapped them out and I am temporarily using Mirage M3's and the soundstage is much greater as well as separation. Until this swap, I would not have understood what you meant by 'jammed', but I believe I do now.

BTW, I do think the A3 is a bit under powered for the N803's, but IMO, another amp, though it may improve things as the 803's improve with a lot of power, will not help in the area you mention. Furthermore, you mention you like rock music, this isn't a strong point for the N803's.
aboldor
49 posts
 
IMO a MF A3 alone is *not* enough for Nautilus speakers. I've had an A300 (which is supposed to be more powerful than the A3) driving N805's and while the sound was nice, I could definitely feel an improvement when I traded up for a stronger amp. The B&W's need lots of juice to sound their best, so look for a bigger amp or perhaps bi-amping.
zorro
44 posts
 

What about BAT VK 150SE's (150 watts per channel)it's ok with the N803's?I'm thinking to buy the 803's to use with my BAT's.

Thanks for your help in advance
drrdiamond
671 posts
 
I think that your lack of sufficient power may be your problem. B&W's need power! .. The more, the better!

I have way over 600 watts per channel on my B&W's and they are rated at 93db sensitivity. Although I have never passively biamped my speakers, I think that may be the way to go. When I actively biamped mine, I realized the biggest improvement that I have ever made to my system.

Good luck.
Richard
More to discover