Is there a glass ceiling for cable technology??


Every year or two year, cable manufacturers , (like other audio components) introduce newer and better versions of the series that came before.

Despite new cable materials and geometries of construction, will there be a point where the "newest version" will have reached the glass ceiling of ultimate performance??
sunnyjim
Glass Ceilings are an interesting topic in general in this hobby.

Just how good can anything sound in given room? Its a fair question.

My suspicion is that what determines the absolute sound in home playback at this point is 98% subjective and 2% technical/objective.

Absolute sounds abound elsewhere all around us, but the biggest technical limit for home playback is probably the quality and nature of the recording.

Plus nothing stays exactly the same over time, including us and our perceptions day to day, so what sounds like the glass ceiling one day may very well not the next.

IF you are enjoying most all of your music most all of the time, then I would say you are practically in a very good place.

If you've been at it for awhile and not the case, then maybe try some digital audio streaming off even a half decent computer and some good headphones or earbuds (not the cheap stuff that comes with most devices). There is a lot less that can go wrong there as a start!
Post removed 
In a word, no.

Having said that, I've gotten the best results I've had with some plain old 16 gauge .9999 soft annealed silver wire with an 8 gauge teflon tube that's so big it makes air the primary dielectric. No connectors, just bare wire.

All the best,
Nonoise
Audioquest ICs - polyethylene or polyethylene foam, or polyethylene foam in oversized tubes, Teflon, Teflon foam, Teflon foam in oversized tubes. Metal can be very pure but standard oxygen free copper has still thousands of crystals per foot(impurities reside between crystals) while the best metals have one crystal being made in hot forms that allow to cool metal slowly preventing crystalization (Ohno Continuous Cast).

My interconnects are 0.5m XLR Acoustic Zen Absolute (silver in oversized foam Teflon). While typical cable capacitance is about 30pF/ft - Absolute is 6.1pF/ft

How does it sound? It is more refined than previous 10x cheaper 0.5m XLR AQ King Cobra. Everything is a little bit better. Sound is slightly smoother, faster, cleaner with the same neutral balance. Is it worth paying 10x more? Perhaps not (for my system), but I got very good deal (and it is going to stay forever). It is for me point of diminishing returns. Even with better system and better room my ears are still the same. This point of diminishing returns is different for different people. Some are satisfied with lamp cord and it is great - saves a lot of money.
Even determining the ceiling at present in any quantitative versus qualitative way with wires may be an impossible task.

Each will have their own opinions based on what they hear. That's about it. I do not foresee any large government funded research projects in the foreseeable future that might put these kind of audio twilight zone questions to rest.

My opinion is that if teh system is good and working to user expectations overall otherwise, finding wires that fit in properly should not be that hard with a little trial and error along the way. Need not cost a fortune, unless teh final frontier of wire technology is something that truly peaks ones interest.