Cable Stress Relief

Complain to manufacturers. They may give you free lighter weight replacement as part of safety recall.
Also there's an option to use Prozac Rx(tends to relieve stress). Just crush them and pour some powder over the stressed parts.

There is more reason to do so than just stress relief. Unsupported hanging cables are subject to vibration due to sound waves, and un-dampened cable vibration is transferred to the component with a very negative effect to SQ. Cables are best supported in multiple places with resonance canceling devices, which can be a DIY project with stiff construction paper fashioned into a 4-5" tall cylinder secured with tape. Fill a baggie with sand or kitty litter, seal, and place inside the cylinder. The mass absorbes the vibrations. Where cables touch the shelf, use foam "pucks."

In fact, I utilize many of these in my system, not only for the previously stated reason, but as cable elevators to get them up off the carpet for sonic effect. The cylinders (3" diameter) can be made with stiff black construction paper (available at an art supply store) and taped with black masking type tape for aesthetics.

I ended up cutting a piece of thick foam padding (that you often see in packing material) and it is providing support to my power cable.

I'm thinking of cutting the foam padding in half and adding a few layers of sorbothane and then gluing it back together attaching a small battery to bias the vibrations down the foam. .... or perhaps not. LoL