CD output voltage too high for preamp: what to do?

I have a similar situation with a high gain amp (.8v for full output, 30 db gain) and was having the same issue with the volume control, both for digital (1.5v) and analog playback. I just bought the Rothwell attenuators and they work for me. Now I can go to about 12 o'clock before the level begins to get too loud (previously between 9 and 10 was the norm). I don't notice additional noise and used on the inputs of the amp I've lowered the gain from the preamp about 10db. Since this seems to be an issue with the CDP, I would first try these on the CD input of the preamp so as not to interfere with an other sources you may be using.

The fancy term "Attenuator" disguises the fact that we are talking about a couple of resistors. It's just a voltage divider. I would simply build it into the input jacks of the preamp. Do it with ordinary resistors, and when you get the volume right you can replace them with "audiophile" resistors if that makes you feel good.

This is a bit of a curiosity for me. If the output of a DAC is 1.5V, is there a minimum input impedance the preamp should have to accomodate the DACs output? Does the preamps gain play into this equation? My preamp has 4 gain settings, 11db, 14db, 17db, and 20db. I have always used the preamp with the 11db setting, but since I am now using the Rothwell attenuators it would appear that only 1bd of gain is getting passed into the amp. That seems pretty low to me. It's been suggested by others to go to a passive, but I researched this and don't want to risk giving anything up in dynamics. The preamp is a Joule Electra LA-100 MkIII (20k input impedance, 300 ohn output impedance).

If your AI preamp is out of warranty and you have the schematics, you can probably get a good tech (if you know one) to change a couple of resistors on the premap attentuation board....come to think of it, AI should do this for you at a very low cost.