2. amps-preamps
  3. 1345682553

B&K amp parts source

Hi All,

I have a B&K Ref 2220 which sounds very nice with the Thiel CS 3.5 speakers in my secondary system. However, the power on button has become unreliable, sometimes requiring dozens of presses to turn the amp off. I have repeatedly contacted ATI who aquired B&K and am told, " We have all their parts, but nothing is organized so we can't find it for you."
I had my local electronics shop call ATI, and they got the same response. My local tech commented that the power switch on my amp looked identical to ones he had seen on other B&K amps, so it should not be a rare part. What I am hoping you can help with is where, other than ATI, might I get one? Perhaps a dealer who stocked a lot of B&K amps and has one?
BTW my local tech, who I think is highly competent, cleaned and lubricated my switch, but the problem was not improved.
Thanks in advance!
drjay
dtc's avatar
dtc
1,047 posts
 
You can try George Reamsnyder at Eastern Elite Audio Video He is a 12-year veteran of B&K Components, Ltd. and was the head of the Customer Service and Technical Support departments. The company has several ex B&K folks and is located in Buffalo NY. I believe he still does B&K repair
marakanetz's avatar
marakanetz
5,473 posts
 
I've always prefered toggle switches that are much more durable than OP described. If there's a possibility to connect toggle switch onto the same socket(just measure the size) you can go for it. It will perform the same function. In my case I simply use master switch for my equipment from Panamax power supply and technically you can simply short that switch and not use it at all.
hifigeek1
770 posts
 
You might wish to contact Byston as they used a similar on/ off switch. The only question, is the hole size for the button...
bdgregory
1,715 posts
 
can you remove the existing switch and get a part number? I can't imagine that it's not an off the shelf part. The button that shows on the outside may be special to B&K, but the switch itself is likely standard and available at Mouser
gbart
290 posts
 
Drjay, the original switch is round, which should make installing a replacement easier, although you may need to do some minor modification to get the new switch to fit. Digi-Key has a selection of 16A 120V round pushbutton switches, and one 20A 120V round pushbutton switch in stock. You may also be able to use a toggle switch in place of a pushbutton, if it should come down to that.

http://www.digikey.com/product-detail/en/C7000AFBB/1091-1038-ND/2747869

http://www.digikey.com/product-detail/en/PR141C1100/EG4696-ND/2116175

http://www.digikey.com/product-detail/en/PA301/432-1205-ND/696600

.
More to discover