Lots of detail, great imaging, not much bass?

B_limo,
You might want to check if you have enough gain in the system because of a passive volume control. The next speakers that you get should have a sensitivity rating of at least 90+db.
I faced this issue when I introduced the Promitheus TVC in the system. But as soon as I changed the connection between the TVC and the amp to XLR, things fell into place. Enough bass to shake the entire house! The reason was the amp now sees, for example, 0.8V instead of 0.4V, since there are 2 legs (+/-) in the XRL connection. So I am getting a nice gain at lower settings of the TVC. In your case you simply cannot do this, since you have no XLR at the attenuator output.

You might give consideration to a used pair of Triangle Cometes.

Thanks sandstone! That was actually another pair that I've heard about here and was considering also.

Thanks for the input Milpai, but I think you might of misunderstood my question; I'm looking for a pair of speakers that image well and have good detail but have low levels of bass, as bass is what is going to travel through walls and bother neighbors. Sorry if my question is confusing!

My goodness, B. If you want those really low bass notes, you have to have the right set up! My 800wpch. monos hit the spot. I have a neighbor who's a real a-hole too:)

Wait.

Let get this straight --

You DO NOT want a lot of bass.

You DO want detail and imaging.

With a budget of $700 for used, I would recommend you listen to some smaller Proacs, maybe some of the Tablettes and if you can find a 1SC (great speaker) near your price level.