ERS Cloth uses


What are the best uses of ERS cloth for a cd/dvd player?
Would you explain your favorite treatment.
From your experience have you noticed worthwhile improvement
from it use?
psacanli
tbg - maybe so... maybe out of the entire house just to be on the safe side....

Cheers
Tpg, I ask the location cause big cities can cause issues. I live near huge radio towers that create big issues in my system. Perhaps, what I am benefiting from is reducing all the noise from the towers which proves better results then the negatives of applying it. If I would move up north of here in northern minnesota (you know) I may get some of the chocking out the life, but maybe the huge towers and big city are whats chocking out life and the ers is to the rescue.

I know that I already have about 20 sheets, 8 shakti stones, 400 ferrite cores spread around my house and garage among other things. The noise floor keeps dropping and cymbals become more brassy, and natural.

If I move south on a ranch like I'm thinking, I realize I will have a flood of this stuff that I wont need.

Tbg, your focus of creating a real sound may be the right track. I think some of us, when designing are systems are actually heading down the wrong path of the sound they are trying to create. They create what may sound good to their ears, though that may not be accurate for realism of reproduction.

I use drums and cymbals in music to create a natural sound in my system as I am a drummer.

Geoff, I am not surprised by the results of placing a sheet on the table. I have heard of guys lining their room walls with a large roll of this stuff.
I have found that ferrous metals seem to reduce low frequency noise while non ferrous metals seem to reduce high frequency noise. Both types of metals seem to reflect one or the other of these frequency bands back into the device that is trying to be shielded. To much of a good thing may become a bad thing. So I have found it very important to mechanically couple all my electronics to ground so as to releave the influence of noise in general.

I have two ac main panel boxes located in my audio room. One box is dedicated to the system only. Both of these boxes are behind a decorative panel lined with long hair sheeps wool..at the 1st reflection point. I will remove the ferrous cover and listen and report any difference either attached or not. Ferrous metal will bend and distort field lines, though maybe not in a negative way with the ac mains. Tom
ERS cloth not looking worthwhile at all from this post. Any scientific types have any comments? Noise reduction in CD/DVD players is so worthwhile.