Clarity Caps vs Kimber kaps

Tony Gee/Humble HiFi seems to be the only widely read reviewer of exotic caps who also tests caps for benefits accruing from .01uf bypass. In most cases he finds bypassing preferable(particular in crossover), and for this purpose he likes cheap Vishay MKP caps. I have not compared these Vishays to Russian FT-1, but I doubt that the Vishays can equal NOS Russian teflon in such applications. However, one cannot use bypass caps to make a silk purse out of a sow's ear. In my crossover, Claritycap MR without bypass easily surpassed stock cryoed Hovland with teflon bypass.

Reb, .1uf K-71 styrenes bypassed with .01uf FT-1 teflon sound damn good in PS around DAC and analog section of my CDP. However I have not compared this arrangement to much else.

Multiple signal paths provided by stacking caps even those of the same type and brand have been in my experience an injection of multipath distortion. Phase and timing errors can be easily heard with these stacks or even simple bypass. Tom

I agree with Tom's assessment. Maybe bypassed caps can work in a speaker cross-over or in a power supply when properly done, but in a signal path, used full range, as in a preamp output coupler, I also hear these time and phase errors. In initial listening tests, your brain can be fooled into thinking you're getting better sound with usually an appearance of better highs, but ultimately my ears tell my brain that something isn't natural with this bypass arrangement and when the single cap is alone, my ear thanks me for getting rid of this annoying phase and time shift phenomenon. YMMV and IMHO, as usual.

Again, it is an art as to avoid the perception of time/phase shift when bypassing signal path. In fact, in my pre-amp I use 3 output caps. The art is to make the sound that passes thru them come out as whole. One trick I use is to make a mechanical connection between very short(1/4") capacitor leads and then solder. For the .015UF Teflon bypass cap, I use a longer length Auric copper lead. I have never been successful with .01UF bypass caps in the signal path ( .01uf was a typo in previous post). The combination I use in my preamp is base cap 5.0UF, second cap .22UF, third cap .015UF. In my cd player I use base cap 2.0UF bypassed with .015UF FT-1 Teflon.

In conclusion, not only have I heard phase time shift from bypassing signal path capacitors, I've also learned how to eliminate it.

BTW, I've read every single capacitor blog on the internet. Including Tony G, Tempo electric, V-Cap test, Capacitor Orgy etc.

I'm kinda like the guy you scratch your head in bewhilderment at. You know, the one that makes his own interconnects and power cords. Fixes his own cars, has the greenest lawn, sides his own house etc etc etc. All by myself, self taught.

Good for you, Reb. It's pioneers like you that make this hobby fun. (O:)