Static electricity Killin me.


Everytime I get up and touch any part of my rig I shhot a two inch lightning bolt onto my equipment. It's gotten so bad that I'm picking the equipment I figure it has the least impact on to shock, before I touch the piece that I'm actually after. You guys experience the same thing? And if so, what's the best way to get rid of the buildup? Speaker binding post? Cd player chasis? If I touch the wadia 170i first, it actually stunts it for a second.
128x128b_limo
I touch a corner of drywall to ground me out. The drywall has metal corner bead and will ground it out. Its right next to the system so I dont have to move and create more static.
It was bad for a while, when I touched my Krell KRC2 it would send it into mute mode.
-John
I had lots of static as well and was afraid to touch any metal part of my equipment. I have lots of carpet and it didn't matter if I had shoes on or off. I sprayed areas with static guard which helped for a little while but then the static would be back in a couple of days. Once I started raising my cables off the carpet the static started to diminish but was not completely gone. I think what killed it completely for me was when I eliminated one dedicated line which I felt had a questionable ground. I just turned that breaker off and ran the audio through the other dedicated circuit. Eventually I will check the ground on the one breaker. I had a subwoofer plugged into that circuit which caused a hum. Now it is pretty rare if I get a static shock and if I do it is minimal. I also think static may attenuate the high frequencies and raising the cables off the carpet did help.
Wow, lots of responses! I've just started grounding myself on a heater vent next to my equipment. The culprit is the dry winter air here in colorado. It's pretty dry here. When I was young, my friend and I used to walk around in our socks, shuffling our feet on the carpet to build up electricity so that we could unexpectantly shock one another, usually on the nose or ear. Hurt like hell!

Sgr, thanks for the tip! I'll have to try that with my cables! I was never a believer in raising my cables off the floor but maybe it would be wise to look into that also!
B_limo First the fact you are getting shocked means you have a well grounded system. But most people don't realize that when you feel a shock it is somewhere in the neighborhood of 20K volts. Good zaps have been measured to 70k. It's all voltage with no current. That being said it over time will cause some damage. Keep touching that heater vent first and if you don't like the feel of the shock hold a coin and touch it to the heater vent.
"over time will cause some damage.

Static electricity damaged the input chip in my Levinson tranport.