AudioQuest PowerQuest 707 Review


Received my Audioquest PowerQuest 707 Power Conditioner yesterday.

Bottom line: I'm keeping it. It significantly improved the overall presentation.

Before installing the 707 my system sounded wonderful and I had no complaints. As to noise: None I could hear even with my ear against the speaker. However I read many reviews where others had a similar situation and yet found an improvement with a PC. I think the more resolving the system the more potential benefit there is with a PC. Especially with Digital components. Noise is Kryptonite to Digital. Maybe analog components such as Turntables and Phone preamps may not benefit as much. But if you have any type of decent setup you should notice an improvement especially if your power is dirty or there is a lot of Wifi, EMF, etc.  And remember nearby Solar panels,WiFi and mobile phones and towers can introduce noise not present on the line.

As background my system consists of:

Accuphase P4600 Power Amp

Aurender N20 Streamer

MSB Discrete DAC

Harbeth C7ES-XD Speakers

I chose the 707 because It looks like the sweet spot in the AudioQuest range. It's the top of the PowerQuest line before the Niagra line. Its specs are very similar to the Niagra 1200 plus it includes a heavy duty AudioQuest Power Cable. It reduces both Common mode and Differential noise. It has non-sacrificial surge protection, extreme voltage monitoring and shutdown and Transient Power Correction that offers 45 Amps of transient reserve power for the High Current outlets designed for power amps and sub woofers. That last feature is not included in the 1200 which is $300 more and doesn't include a cable. The unit has 12 outlets:8 for line components and 4 high current for amps. So for $1295 it was a reasonable price and why I decided to try it. So how did it perform?

My system was extremely quiet with no perceived noise but with the PC it added another level of blackness to the background. That allowed minor details in the recordings that I never noticed before to be heard. 

The soundstage width and depth were unchanged however the instruments and instrument groupings in the image became more defined. They are more in focus with no smearing between images so imaging was noticeably improved.

The upper frequencies especially strings are more silken and refined. I thought they were that way before adding the PC but after they became even more relaxed and natural.

The overall presentation is more calm, relaxed. Large orchestral climaxes are reproduced without strain, harshness or over brightness in strings and brass.

As a result I found in my many reference tracks I could increase volume 2-3db with no sign of effort.

And of course there is surge and extreme voltage protection.

In my setup I connected my digital sources: Streamer, Network Switch and the Digital power supply of my DAC to the first line bank. Each bank is isolated from each other. I connected the Analog power supply from the DAC to the second line bank. I left the High Current bank empty. At some point I'll try my amp plugged into the PC. For now it remains into the wall. And Accuphase strongly recommends using the wall only.

So overall it's a worthwhile improvement and one that is a bargain considering the impact it has made to my system. I'm sure I could get some additional improvement by moving up to the Niagra 3000 but that is $3900. If I was definitely going to connect the amp to a PC I would consider that as the reserve power is even higher.

As to the noise issue. I appears there is noise that is not readily noticeable until you remove it. Even with good power coming from the wall there are improvements that can be found and I suspect non-line generated noise is present all around us and has subtle effects on the sound.

 

jfrmusic

Thanks for your description of your experience. Great description of what a noise floor is and what happens when it is lowered. If you haven’t experienced this, it is easy to think if you can’t hear noise then no improvement will occur with power conditioner, direct lines, or power cords… although the improvement is almost limitless. 

Thanks for sharing. A new power conditioner is in my future and I will consider AudioQuest. 

Update:

The user guide suggested trying components into different bansk to find the best connection compatibility and combination. So even though everything sounded great I decided to try it. 

First I tried the Amp into the High Current Bank. Didn't like that. Sound was not as dynamic or clear so the amp went bank into the wall.

Then I tried all line level components into the High Current bank. There was actually some improvement to the calmness of the presentation but a loss of impact and imaging.

After trying various combinations I found the best was:

The Analog Power supply for my DAC plugged into the third Filtered Bank.

The Digital Power supply for my DAC and the Network Switch plugged into the second Filtered Bank.

The Streamer plugged into the High Current Bank.

This slightly improved the overall presentation from my initial set of connections listed in my review. It provided an even more laid back, calm presentation without impacting the imaging that was so compelling when I first tested the PC.

So now each of my components are now entirely discrete from each other and it appears that the Streamer plays better with the higher current and not as much noise filtering. The High Current bank is not as heavily filtered.

So if you get a PC experiment with the various banks until you find the best combination. It sounded good in all permutations but the final one was clearly the best.

As to Upgrading the supplied cable:

The supplied cable is very heavy duty. It's one of AudioQuest's specifically designed for their PCs. I saw a YouTube review where the person tried an expensive AudioQuest power cable with the 707and while there was some additional measured noise reduction he wasn't sure he could hear any sound difference. So at this point I'm not planning on a cable upgrade but maybe. Actually I'd like a locking power cable. If you are moving the unit around to swap connections it's easy for the power cable to come out. As to other brands of cable AudioQuest recommends a directional cable from their line. Not sure the implications. I would check with them before using another brand

 

First I tried the Amp into the High Current Bank. Didn’t like that. Sound was not as dynamic or clear so the amp went bank into the wall.

Give it time to burn in...also try the other high current outlets

Update

Sorry to say I returned the 707. After a week of concentrated listening I realized that what first appealed to me was actually an increase in midrange energy. It is a vivid presentation that in a way is more tube like. Everything is warmer, fuller and somewhat closer in perspective. This is a valid and euphonic sound. However in the end it's not a perspective that over time I found to my liking. It's most noticeable with Classical recordings. With the 707 I'm sitting in the first 5 rows. Without the 707 and plugged into the wall I'm siting in rows 10 to 15. I prefer that more set back perspective. You may like what the 707 does and it does do its job. The overall sound was slightly quieter but with the effect of a warmer midrange. Bass is slightly fuller and Strings more forward although still refined. So basically less air or atmosphere in the sound.

I'm not sure what I will do next. I've re-read a number of Power Conditioner reviews and it seems that the reviewers often mention that the lower treble can be more vivid or forward etc. So this may be a common trait of active conditioners. I haven't noticed this mentioned on the few passive conditioner reviews I've read. This included Shunyata and Furutech. In fact a review of one of the Shunyata PCs said the perspective was more distant. So maybe I will try one of those. But again I do not notice any apparent noise issues with my system but as I mentioned you don't notice it until it's removed.