Balanced wiring for Sennhesier 800 S

The Ayre QX-5 Twenty uses two connectors for balanced.

Gotcha. The Cardas Clear cable is very nice. I have one with dual XLR for my LCD-4.  I think it's the best build of any headphone cable I have.  They use two cables and you can just order dual XLR with the right connectors for Sennheiser 800 / 800s.  Nothing to "try to learn".  Check out Moon Audio.

The Ayre QX-5 Twenty uses two connectors for balanced. Lavricables is trying to learn the Ayre wiring scheme.

Sennheiser makes a high quality balanced cable for the 800s.  I have one and use it with the 800.  It's a good cable.  Works on the 800 and 800s.  

I've used Forza Audio Works and Norne Cables with great results. Both should have many options for different cable options, termination choices, maybe even colors, so you can find something to fit your budget.

I have the 800s. Since everyone strongly suggests using balanced cables, I ordered a set from lavricables. (I think @soix had recommended them).  Their website has many options, and the guys at Lauri were great at answering all my questions. I ended up with silver cables, balanced.  I could not be happier and I highly recommend them.

Check with ZMFheadphones.  They make to order several grades of cables with a variety of connectors.

I have balanced cables with my Sens......I think someone years ago recommended Cardas.......still have them

LavriCables can do it.  I made a mistake about the balanced inputs to the QX-5.  They're 3.5 mm, not 1/4".  So I need two cables with male 3.5 mm plugs at one end and Sennheiser 800S connectors at the other.  The cables should be wrapped together except at the ends.  

I may try the unbalanced cable that comes with the 800S before ordering balanced cables.  Ayre offers 3.5 mm and 1/4" unbalanced inputs.  

You can try LavriCables as I think I’ve read they can do custom cables so worth a shot just to see. 

The Ayre QX-5 uses separate left and right inputs for balanced, so I need a cable with two 1/4" connectors to the QX-5 and two connectors to the Sennheiser 800S, essentially separate left and right cables wrapped together and split out only at the ends.  Where might I find such a cable? 

I've used both Lavri and Moon Audio Black Dragon balanced headphone cables and they sound fine.... 

I and several others here have bought LavriCables headphone cables and have been very impressed with their performance, build quality, and value.  Here are the cables they make for your ‘phones…

https://www.lavricables.com/cables/master-silver-sennheiser-hd800-upgrade-cable/
 

https://www.lavricables.com/cables/grand-silver-sennheiser-hd800-hd800s-hd820-upgrade-cable/

Best of luck. 

@dbphd I would highly recommend you purchase quality aftermarket cables instead of building your own. There should be a number to choose from, like Arctic Cables, Norne Audio, Moon Audio and others. The headphone side connectors are a royal pain to assemble since there are multiple pins and they are small and very close together.