2. amps-preamps
  3. 166065-160423

Good 2 channel integrated amplifier for 702 s2 under 3k?

Hey everyone just purchased a pair of new B&W 702 s2 speakers today but am trying to decide the best way to power them for 2-3k. I would like to stay closer to 2k but can stretch to 3k if necessary. I will be using these for 50% music of all types and 50% movies. I would love to upgrade to a 5.1 at some point but I am looking at amplifiers because I don't want to sacrifice sound quality and don't have an affordable solution to this. My priorities are to get as much deep bass as possible out of them and to try and warm up the harsh high frequencies if possible. Here are some I am considering:

1. Rotel RA-1572 (2x120W) 
2. Rotel RA-1592 (2x200W) 
3. Musical Fidelity M6si (2x220W)
4. NAD M10 (2x100W)
5. NAD C 388 BluOS-2i (2x150W)
6. Arcam SR250 (2x250W)

I am open to new suggestions and have just started my search. I am also interested to know if I will really need the RA-1592 with 200W or if the cheaper version with 120W should be enough if I go with Rotel? Also, if there is a good option for an AV reciever that will sound comparable but allow me to go with 5.1. Thanks!





km1181
mesch
3,500 posts
 
The amount of power will depend on room size. What is it?

You might find that 2-channel will work fine for movies. Do you have a dedicated music/theater room?
jdoris
972 posts
 
Looks like your speakers are tolerably efficient, at 90db.  Depending on listening volumes, room size etc., it's likely you could get away with less power, and invest in fewer, better watts.
I'd probably figure out exactly what my power requirements are, and widen my search.
Do you want "just" an integrated, or one with DAC etc.?
erik_squires
16,116 posts
 
I recommend warm amps with those speakers, but most go the other way.

The small Parasound A series would work really well.
russ69's avatar
russ69
3,514 posts
 
MF M6si is the winner in that group. 
mofojo
2,300 posts
 
I would take the 5.1 receiver out of the mix if you want good 2 channel. 
3k puts you in used Lyngdorf 2170 territory. With the 90db sensitivity I think it would sound fantastic. The Lyngdorf room correction is no joke. Also if you have a DAC you are using could sell that. 
More to discover