Subwoofer Advice

@big_greg nope. I will call them next week, I think they’re pretty busy with all the sales going on right now and the advice seemed a little sketchy to me! Thanks 

@big_greg its funny SVS told me that I shouldn’t mix & match subs, at least when I suggested 2 micro 3000s and their recommended SB-2000 Pro (either 2 of 4 for my room). The SB-2000 no longer come in white, which I kinda had my heart set on!

Did they say why?  It's worked out fine for me.  I can see how their could be some gain matching issues, but that shouldn't be that hard to figure out.

@mijostyn - what's your thought on these: 

https://www.audiokinesis.com/the-swarm-subwoofer-system-1.html

@big_greg its funny SVS told me that I shouldn’t mix & match subs, at least when I suggested 2 micro 3000s and their recommended SB-2000 Pro (either 2 of 4 for my room). The SB-2000 no longer come in white, which I kinda had my heart set on!

@big_greg what models are your subs?

I have two Rythmik F25s and two SVS SB 13 Ultra subs. Much bigger and more powerful than what you're looking at, but the volume on the F25s is below 9 o'clock and the SVS are at -25. They are all barely on. 

@big_greg what models are your subs?

@navyachts I would be surprised if four doesn't do the job. Note that the four I have are bigger models, but I have a fairly large room that opens into another room. The volume levels are quite low on the subs and with some electronic music, they shake the house. Most of the time, you wouldn't know they are turned on. 

@big_greg Happy Thanksgiving Mike! Remember when I told you SVS said 2 subs were to small for my room. I was thinking, how about 4 (like you)? SVS is closed today, but I will check with them tomorrow about this. $3,000 for 4 subs is a little easier to swallow than @mijostyn ’s recommendation of the KEF subs which will run close to $10K! And another $4-5 if I go with a second DAC and DSP...SHEEHS!

@dancub will do, thank you!

@navyachts Well, one of the things, for me, is that things come and go. Experimenting - the journey if you will - is what I've really got off on.  Also, I've bought most of my speaker gear in bad shape and repaired it, so the investment is low. OTOH, the DSP landscape, like the DAC one, is evolving really fast. If you stay just behind that power curve, you can get really great stuff inexpensively.  Also, Dirac is not the only game in town. Lots of action going on in the computer based audio world and it's just going to get better and easier to use. There are a lot of people smarter than me about this stuff so keep asking the questions you've been asking. You'll find a path forward. 

I’m 

@dancub thanks so much for your detailed and informative Response! I’ve had others tell me that this mini DSP is the cats meow. It’s just I’m kind of technically challenged with all that kinda stuff and it sounds like it’s a real pain . I’m not getting what I want out of my system either and I’ve got so much money into it. I just getting tired of spending more. But maybe I should just give this Dirac Thing a shot.

@navyachts Sure. First, I have a small, low ceiling basement room. Large, handlaid stone foundation walls. Minor treatments (rug, fiberglas batting in rafters) but except for near field listening, it's been a slog to make any of my setup(s) sound right. So I bought a used MiniDSP SHD with built-in Dirac Live room correction and use it as my preamp. Since the SHD has kinda a studio vibe, it's got tons of connections. It took me a while to set up the DIrac - pre-measurements are a pain - but once there, it's been a gas. It locks in the imaging - important to me - making my room challenges mostly disappear. I've A/B'd it with multiple speakers and except for some really quirky things that it can cause, like suddenly heavy boom from the SVSs, once you get the Dirac happy, it's rock solid. Difference between on and off is distinct. 

I have to add, the SHD comes with a separate DSP app ("Device Console") that allows L/R balancing and EQing the signal. I expected the Dirac SW to do the former but it dosen't.  Anyway, I have tinnitus and high frequency hearing loss, so the Device Console allows me to compensate. You can do multiple versions, store and reload at your leisure.  So I have a setup just for my ears, one for my hi-fi buddies when they visit and one for watching Dune with my wife.

Hope that answer's your questions and not put you to sleep...

P.S. Current system:  Hot rodded Rega Planar 2 with Elac PPA-2 pre, Bluesound Node 2i streamer, MiniDSP SHD preamp,  Bryston 2,5B3 or 4B SST, Topping DX5 DAC. Speakers are all over the map: Proac Response 3.8s, KEF LS50s, Klipsch RP-600Ms and on and on.  Also have an experimental set of Lii Audio F15s baffleless with a Decware SE84UFO that's going to come online eventually.  I know, I need to get a life...

Thanks @dancub, could you elaborate more on your Dirac Live experience?

Did you purchase hardware/software? Or, you mention online, did you use an online service? I see some people offer this like The YouTuber Pursuit of Perfect System.

I have two SV-1000 in a small room, sorta near the corners. I know but the corner thing is what SVS's manual recommended. OTOH, I've now set the things up with Dirac Live correction and don't seem to get much uglyness.  SVS, when I bought the units, sent me the contact info for their consultant who turned out to be a sub-contractor. Nice guy but didn't get them settled in until the Dirac came online. YMMV.

@big_greg Thanks, my big problem is no room, the Micros were a perfect fit!

I'm a little surprised, but when someone tries to talk me out of buying something (and not trying to up sell me), I listen. 

If you can stretch your budget a little, give Rythmik a call. They make better subs, but you won't have the convenience of an app like you would with svs or the in-home demo.

@big_greg I did some more research on this and SVS themselves said the micros are too small for my room, so I cancelled the order.

@rikkipuu, I have heard that there is a nanosecond delay, so better with movie than music. Also, the subs are recommended to be inboard of the speakers for 2 channel listening, but you found these not to work best for you. I guess every room is different.

I have the transmitters about 4 feet off the floor.  There is no line of sight with either Sub and that has not caused an issue.  I can say it has been over 6 months since I can remember having to re-synch one of the subs.  I have the older Longbow model.  There is a newer transceiver, I am sure it is better.

@rikkipuu Very rarely one of the wireless connection may drop and I immediately notice something is off.

With the subs behind you how do you keep a good line of site with the transmitters for the subs?

@big_greg thanks & will do!

Please post after you get them and let us know how it goes.  Feel free to PM if you have questions.

@big_greg LOL, nothing worse than sitting at home, by yourself, on the computer looking at long weekend sales. $150 each off, plus another 5% for two SVS 3000 Micros and guess who bit...UGH!

Sending my cables to BJC tomorrow for cutting a re-termination, which will be a third of buying new.

Best part, as you said, 45-day trial, so now I’m all set.

If I don’t like it, I can still try mijostyn’s route, but hey, that’s gonna be $7 grand all in with DSP. I don’t think I can come up with that kind coin any time soon.

Thanks again for your help.

You do the same fine sir!

@big_greg  ok, thanks for your feedback. I’m working on it. Speaking of working, have a great Labor Day!

By the way, have you ever played around with DSP?

@navyachts not so much in my main system. I've played around with it in my car and have experimented with it in Roon, but it usually ends up sounding not quite right.  I've also experimented with the DSP functions in the Parks Puffin.  None of it is really to my liking.  

I have a friend that uses a Trinnov processor as a preamp for his system and it sounds quite nice, so I do believe it can work well and be a useful tool.

As far as cables, I tend to use higher end stuff for most of my cabling, but for subwoofers, BJC should be fine.  I think I have a couple of their cables in use with my subs.

I like that the newer SVS subs provide the app and DSP to help you tune them, that could be very useful.  If you can get the subs in opposite corners of the room, that is often best, but work with what your room gives you and experiment with placement.  They might sound fine at the front of your room.  Every room is different and you won't know until you try.  If you're using single-ended or balanced cables, you only need one cable for each sub.

I never got to the crawl.  It just added so much where I had them I was satisfied.  There is a simple volume knob and a crossover frequency knob on the back.  Bit of trial and error until I found the best sound.

Keeping them out of site and harms way makes me like them more.

REL sells a wireless transceiver to use with the speakers.  I use the XLR hot connection as recommended.

https://rel.net/shop/accessories/airship-ii/

@big_greg thanks! I’m just trying to figure out my cabling first. I have 1/2 dozen BJC subwoofer cables, none of are the correct length. I will need to run 4 cables (two 8 footers & two 12 footers) from my preamp on the side wall, all around the corner to the subs that will probably be between the power amp and the speakers. BJC is closed until Tuesday and will “negotiate” with them then. Maybe I should make the cables longer though, they might sound  better on the outside of the speakers?

@rikkipuu said that his subs sounded better in the back corner of the room. I could try them wirelessly there and if they sounded better, I could start drilling holes in the walls, floors, etc.

Anyways, need some time to save up! Daughters in the last year of law school and she’s running out of money!!

By the way, have you ever played around with DSP?

@navyachts I'm not trying to shill for SVS, I promise, but the 3000 Micro can be remotely adjusted using an app on your phone or tablet.  SVS also provides wireless options if you don't want to run cables.  I recommend connecting with cables if you can.

@rikkipuu Hmm, wireless? That's interesting.

Are they easy to set up, do they come with some kind of software, or do you do the "Crawl"?

I have 2 REL S/510 subs.  They are wireless so there is a lot of freedom on placement (just needs AC).  Putting them near the back corners of the room away from the main speakers was best for me.  Very rarely one of the wireless connection may drop and I immediately notice something is off.  Two subs are synergistic.

@big_greg OK, got it, thanks!

It looks like your preamp has 3 sets of outputs.  The SVS Micro only has unbalanced inputs, so it would have to be from one of your RCA outputs.  Other subwoofers have balanced inputs.  You can get the Rythmik F12 with balanced inputs (it's an option) if those are the only outputs you have available.  It looks like they are back-ordered for a couple of months though.

@big_greg thanks for chiming in. Same question, how would I wire up the SVS Micros?

My power amp is on the same wall as my speakers, all the other components are on the side wall.

My preamp has these outlets:

1. Signal output is through two balanced XLR connectors and four unbalanced RCA connectors. The XLR pinout is identical to the input receptacles.

2. The Processor loop connectors permit the connection of an external audio device such as a surround sound processor or equalizer. Connect the output jacks to the input of the processor, and the output of the processor to the processor input jacks of the preamplifier.

@big_greg You are right, this is a diversion, but @navyachts problem has been successfully addressed and his interest has been diverted to the subwoofer question. I am nowhere near the most intelligent person on this website, but I have been using subs with ESLs since 1978 and building subs since 1987. Experience being the teacher that it is I feel qualified to deal with his situation. ESLs are like the most beautiful girl you wish you never met. It is easy to make them sound terrible putting additional requirements on associated equipment, particularly amplifiers and subwoofer systems. 

Experience is a great teacher.  I recommend letting someone start out slow and easy and if they want to go down rabbit holes from there, good on them.

Let's get back to the original question:

"I don’t have a lot of room, maybe 16" or so square and I was wondering about a pair of SVS Micros. Do you think they would complement the 13As or do I need something bigger?"

The answer is "you won't know until you try".  Get a pair of the SVS Micros, try them out, and if they don't "complement" the speakers, send them back and try something bigger. 

What "additional strain" are they going to put on the amplifiers or subwoofer systems?  They have their own amplifiers and there is no existing subwoofer system.  Everything you're saying makes more $$$$$$$ than ¢¢¢¢¢¢¢.

Not a good idea. The KEFs are quite small. The next best place would be in corners.

@mijostyn Thank you!
Due to space limitations what’s your thoughts on placing both the subwoofers on the same side wall, ninety degrees to the main speakers? Subs are none directional, correct? So, do you think this would be OK?

Now you have no crossover. So, you would take an output off your preamp and run it to the KEFs using the low pass filter in the KEFs.

Once you have the MiniDSP, you would set up the crossover in the MiniDSP and take a digital output to the Benchmark then balanced outputs from the benchmark to the KEFs.

Yes, the MiniDSP will improve the performance of the KEFs alone. You can always add subs later. Two 10" woofers is not going to project anything below 50 Hz with and degree of authority. With the KEFs you will have 4 purpose designed 9" drivers.

@mijostyn couple of quick question, how would I wire up the KEF subs?

1. With the way my system is now - no miniDSP? My amp doesn’t have SUBs out.

2. With miniDSP and the Benchark DAC?

Would the miniDSP work magic maybe with just my Martin Logans, without purchasing the subs? It seems with the ARC Genisis program, the bass can be found with the two 10" woofer already onboard the MLs? I'd just like to integrate the bass better to the room.

Thx.

@greenngoldcheesehead are you suggesting the Rhythmik subs with or without MiniDSP?

I would use the Rhythmik F12 or F12SE which are servo-controlled to match the speed of the ML ESL's.

Not at all, you are going to use them. The M1 will drive your Coda Amp and the Benchmark will drive the KEF amplifiers. The SHD Studio will provide the crossovers, room control and bass management as well as streaming and source selection like any other preamp. 

@mijostyn ok, thanks for that. I presume the KEFs have amps, so I just bypass them?

@navyachts The Coda looks like a fine amp for the MLs. I would not change that. The SHD does not show an amp with the subs because most subwoofers have a plate amp installed in the subwoofer. You would use the Benchmark DAC 3B to drive the subs. If you get a MiniDSP you would disable all processing in the MLs and run them flat, the MiniDSP will take care of everything else. 

@mijostyn If you scroll down to the SHD Studio on this page:

https://www.minidsp.com/products/streaming-hd-series/shd-studio

It has a picture showing only a power amp after the SHD Studio and before the speakers and no power amp between the SHD Studio and the subs. You mention that I need a power amp for the subs. Can you please clarify?

You also mention Benchmark DACs. They currently have 3 models, which one would you recommend for the KEF subs?

Thanks!

@mijostyn Coda #8 power amp, it's listed in my AG Virtual System.

@mijostyn I would hope it doesn't have to cost 36K to solve all these problems. My solution with my very entry level Polks is low gain, that still produces the live sense of "beat in my chest" 

@navyachts  Have ML lower the boost point from 100 Hz down to 80 Hz and maintain the volume at 20 Hz. Rooms are always a problem from bad to terrible.

The M1 is really a DAC and a very good one. Your current speakers are better. You can make any speaker "active" with the right preamp. What I would do in your situation is get a MiniDSP SHD Studio use your M1 on the main speakers and get a less expensive DAC like a Benchmark to run subwoofers. With your system I would get two KEFs and place them inside the MLs right up against the wall. With the MiniDSP get the UMIK 2 (much better). MiniDSP uses DIRAC live,the easiest of all the room control and bass management systems to use. Dirac live will walk you right through the measurement routine, just follow the yellow brick road. The MiniDSP has a digital equalizer built in that is self explanatory and will allow you to make adjustments. You can make your system sound any way you want. I have set up two systems with SHDs so I can handle any problems you might have.

I do not know what amplifier you have. I would like to see either a Parasound amp on the less expensive side or a Pass or Bricasti amp on the more expensive side. The Bricasti M25 or a pair of M28s would be perfect and these amps are the most indestructible amps I have ever seen. Even I can't blow them up. 

@brunomarcs Snakes? Sorry about that. I will give you a different link, maybe this will work. https://imgur.com/user/mijostyn/posts Yes, there is a driver in both ends. the interior volume is 2.15 cubic feet. 0.5 cubic feet are taken up by driver leaving 1.65 cubic feet total. 0.825 cubic feet is a little larger than one of these drivers calls for, lowering the Qts of the subwoofer. This was a wild guess on my part given the interaction of the two drivers being in the same cavity. Uncorrected they are down only 3 dB at 20 Hz at 6 inches with a very flat curve up to 0 dB at 100 Hz where they are cut off. Efficiency is about 89 dB by coarse estimation. As a system the four subwoofers are spaced along the front wall to form a line source. This matches the power radiation of my main loudspeakers and limits room effects. Because the array is horizontal it sends no radiation towards the side walls and in my media room there is essentially no rear wall. The next solid wall is 75 feet away. Consequently, the bass is very event throughout the room with maybe a 3 dB barrier boost at the side walls. 

I stock Walnut, Cherry, South American Mahogany, Maple, Gabon ebony and Cocobolo. Some I source myself, some is kiln dried from a local supplier. I buy in large quantities because it is much cheaper and I love looking at big piles of wood. I get turning blanks from local tree surgeons and I steal burls from the woods around my house 

@mijostyn Just an update, the bass has been a bit too heavy on both the .arc3 files that Anthem has provided me so just this morning I have asked them to edit the file again to see if they could tame the bas down a tad more.

I have a fair bit on $ invested in this my system and not 100% satisfied in what I'm hearing. You mention amplification as did @sounds_real_audio. Should I be looking at an alternative to my power amp? I did notice an improvement in sound when using my Coda pre-amp over the preamp in my Bricasti M1, so maybe a change for the better could be had with swapping out the power amp?

Failing all of this, if the room is truly the problem, I was thinking maybe of liquidating what I have now and in turn maybe trying an active speaker like ATC or maybe Dutch & Dutch 8c with its built-in DSP? Certainly not the most beautiful girl in the world, but maybe they would suffice.