Its really hard to give you advice without knowing what type of speakers you have. I use the Fll0 because it could keep up with my electrostatic speakers. Good Luck.
I also believe all the above subs would work great with your system. I would also like to mention that the JLF112 is another sub you should consider. I personally like it better than the F113. Good Luck.
They're both better. The JL line is generally a bit tighter and a bit more defined than the old DD Velodyne.
I had a 113 on loan for a few weeks and I owned the DD18. My main speakers are Avalon Acoustics Eidolons. Using their internal EQ I never got the JL to blend with my room and speakers. Its speed and definition always drew attention. Using the Velodyne EQ on the JL helped but it just wasn't a match. Even so the JL is a beautiful well made sub.
I've since moved on to a pair of Velodyne DD-12plus which have been substantially redesigned over the original DD series.
All fine subs. REL units in general are excellent and many dealers will say particularly good for music. I don't think you have any downsides with any of these options you mentioned. Just have fun with the process :-)
probably get more head-room and punch at high volumes with the JL subs. I sold Rel in past, which are very musical subs - Not so much slam and power with HT rocking, though. Personally, I like the combo of musicality and HT slam factor of the Paradigm Servo 15 for cheep money, in a large room. The Earthquakes also fill a huge space, take lots of power, and are pretty tight when setup correctly. As with ANY sub, however, your main issues are getting the subs set up in the room properly, in relation to the seats and speakers. Get phase wrong, or sit where there's big suck out in the bass, big bass humps and imporperly mated coherence with the mains and it is all a moot point! You'll never have great bass performance...just a big sonic mess of over-bloated bass engery, that's got lots of issues, and negatives, rather than fast, tight, dynamic, extended, coherent bass with slam and seemless integration. I'd say 3/5ths of the performance is acoustics and setup with the sub (EQ'ing?), and the rest is design of the sub itself. That's bass for you....
I'd say 3/5ths of the performance is acoustics and setup with the sub (EQ'ing?), and the rest is design of the sub itself. That's bass for you....
I'd say 80%, but that's really just me agreeing with AVgoround and adding a little nitpicking for fun.
If you use Audyssey (or equivalent DRC) in your HT electronics, I'd go for the JLs. They go clean and loud better than most. If you do not have DRC in your HT electronics, I'd go Velodyne DD, which includes the same functionality in the sub's set-up software.
BTW, the Velo DRC is IME rather primitive and MUST be set up manually. Marty
You need to take the power delivery to your system into account. If your system is on (1) 15 or 20 amp circuit, you'll need another (as in dedicated) line if you want (2) subs like the Fathom 113s - they are 2500 watts each. I sold my Fathom 112 to a friend and went to (2) James EMB-1200s, because I wanted stereo subs without adding a dedicated line.
"BTW, the Velo DRC is IME rather primitive and MUST be set up manually. Marty"
Primitive, really? Don't you find it odd that professional reviewers use the Velodyne software to show the effects of JL Audio's auto EQ system and even use the Velodyne software to further EQ the JL and many other brands of subwoofers being reviewed? I've done this myself.
Velodyne DD Plus has three methods of one touch optimization: Self-EQ, Auto-EQ, and Manual-EQ Optimization. There is a major degree of auto optimization within the Manual-EQ program by simply accepting the adjustment. The Manual-EQ also offers actual manual adjustments with eight bands of parametric adjustment between 15 and 100 Hz as well as parametric filtering.
There are also provisions for six different preset settings for things like Games and Theater, etc. But most importantly is the ability to make many of these adjustments remotely from the listening position as well as a simple volume with a numerical readout.
If there is another subwoofer that offers more sophistication and the ability to fine tune to integrate more seamlessly musical with a variety of main speakers please let us know.
I think my comment may have been misunderstood - perhaps it wasn't stated as clearly as it could have been. I meant to state that the Velo software is primitive in "auto mode", and I tried to emphasize that limitation on my criticism by capping my comment that it "MUST be set up manually".
I used the SMS-1 for several years and it worked great - when set up manually. If you use auto set-up, you forego the parametric functions of the EQ. You get graphic EQ only (or at least you did on the SMS-1 that I owned) and it just isn't very good. If you doubt that, compare the auto set-up to a careful manual set-up. In my case, I'd call it "night and day". (I don't believe that this has changed in a recent upgrade, but I might have missed it.) I always thought that this was a terrible error on Velo's part, in that it guarantees that many auditions will fail to remotely show what the software is capable of - since many of their dealers will use the easy "auto" set-up for demo. Even worse, they may well tout that as a benefit.
OTH, Audyssey, for example, produces full parametric correction in the "auto" set-up mode. On the other side of the equation, I'd agree that the JL software is severely limited in functionality, regardless of ease of use.
Overall, the Velo offers great functionality, but you've got to work for it. The more advanced user interfaces on the DRC systems from Audyssey, HK (a TI chip, I believe) , etc. provide much better utilization of their capability at the touch of a button than does Velodyne. That's all that I meant by "primitive".
One further note on the Velo DRC software. It does not correct in the time domain, unlike the competing systems mentioned above. Some will find that a critical issue, others (like me) may find that to be of questionable importance.
You must have a verified phone number and physical address in order to post in the Audiogon Forums. Please return to Audiogon.com and complete this step. If you have any questions please contact Support.
