Themadmilkman...... I have the Druids and due to the shipping costs to Australia I decided to try to upgrade them rather than ship out new Souls. I contacted Sean and after a few email exchanges he came up with a few ways to improve the Mk4/08 Driuds.
1. Paint the inside of the cabinet with Soundpaint or Quietcoat, 2 coats min (ala Soul)
2. Make a foam wedge (open cell)which fits into the cutout in the base plate of Druid with a 3/8" gap all round and extending upto the center of the tweeter.Stick the foam to the mesh with contact glue (Soul Essence ish) Improves bass and overall slam acording to Sean.
3. place a 1" dowel between the FRD and tweeter connecting the front and back of the cabinet.......glue in before soundpainting.
this is in addition to the Mudorf SIO cap and Duelund resistor upgrade (ala Soul)which I already have.
Another improvement I'm undertaking is to replace the FRD with Soul FRD. This require a resistor tweek from 12ohm to 10ohms.
all this is easily achievable for less than shipping (as I already have the High pass)
I'll report on the changes I find when completed. Even without the driver upgrade the box dampening/ foam wedge and extra brace will improve the Druid Sean suggests.
1. Paint the inside of the cabinet with Soundpaint or Quietcoat, 2 coats min (ala Soul)
2. Make a foam wedge (open cell)which fits into the cutout in the base plate of Druid with a 3/8" gap all round and extending upto the center of the tweeter.Stick the foam to the mesh with contact glue (Soul Essence ish) Improves bass and overall slam acording to Sean.
3. place a 1" dowel between the FRD and tweeter connecting the front and back of the cabinet.......glue in before soundpainting.
this is in addition to the Mudorf SIO cap and Duelund resistor upgrade (ala Soul)which I already have.
Another improvement I'm undertaking is to replace the FRD with Soul FRD. This require a resistor tweek from 12ohm to 10ohms.
all this is easily achievable for less than shipping (as I already have the High pass)
I'll report on the changes I find when completed. Even without the driver upgrade the box dampening/ foam wedge and extra brace will improve the Druid Sean suggests.