looking for a warm ss amp....

I recommend strongly the Plinius 8200 (mkII, preferably).

See: http://forum.audiogon.com/cgi-bin/frr.pl?ramps&1041792473&read&3&4&

all these recommendations are too expensive! i do not have several thousands of dollars to spend. i am looking at spending $500-$800 on a used amp and then another $500 or so on a used preamp if the amp alone will not clear up the brightness. i wish i would have bought the used anthem mc-3 amp on ebay awhile ago for $550 but i didn't. i also had a chance to buy a used rotel 993 amp for $600, but passed it up as well. i probably should have tried one of these since they were in my price range, but oh well. does anyone have any suggestions in my price range? also, does the denon 3802 have the same preamp section as the denon 4800 mentioned above. i am real nervous about upgrading after i read on here how monster cable was horrible and new speaker cables would really help out the sound. i ended up buying signal bi-wire cables for all my speakers, but hear very little difference from the monster xp cables. so again, any warm recommendations for an amp in the $500-$800 range used? also, preamp to match for around $500 used? these will be used to run paradigm studio 60 speakers (metal tweeter). is it possible at this price range?

Fishcall- I used to have a B&K EX-140 (the early dual-mono version of their popular ST-140). I did an A/B to the ST140 at the shop I bought it from (Singer in NYC) and prefered the dual-mono by a slight edge for overall detail. The ST140 was VERY similar though. It was indeed very warm sounding and I did enjoy it. ST140's are easy to find and relatively inexpensive. All that said, if you are looking for "warm" why not got straight to the epicenter of warmth; get a tube amp. Lets see, you have $500-800 for the amp and another 500 for a pre? That's up to $1300. At that price you could buy yourself a great little integrated tube amp like a Jolida 502B putting out 60 watts of sit-by-the-fire warmth which should be plenty to drive most speakers. Heck your Studio 40's are 91db efficient...you could drive those to very satisfying volume with a Jolida 302B or an Audiomat Arpege! Any of these would top anything I've heard in SS at that price range for all around musical listening pleasure. If you have to stick to SS I think Plinius also makes an integrated amp in that price range used, but I've never heard it...only heard tell that it has warmer sound to it.

Good luck.

Marco

My Meitner suggestions, particularly the STR 55, are well within your price range. Get a used Meitner PA6i preamp to go with it, it will be as warm as you could want, with the "plus" upgrade available at some point from John Wright when you have the funds. Of course, finding these pieces used is not that easy, but they do show up from time to time.

I'll restate what I said earlier.

Try to find a used McCormack DNA 0.5 or DNA1 for under $800. They come up for sale very often, and they are outstanding amps! Power, finesse and some warmth.

From what I can tell, you've said nothing about using this setup for home theater. If this will be used in a two channel system only, the best thing you can do is to dump the Denon. Any Denon! You can get a $10,000 amp and it won't sound good with the Denon ahead of it in the chain.

You've given a budget of $1000 to $1300 for a preamp and amp. For $400-$650 you can get an Audible Illusions L1 or 2D preamp, an Audio Research LS1 or LS7 preamp for $500-650. The McCormack DNA 0.5 or DNA1 solid state amps are in the $650-800 range.

Keep the Signal cables and don't worry about spending on anything more expensive. Going to biwire speaker cables at this time wasn't necessary, but since you have them. stand pat with them.

For now, keep it simple and affordable. Good luck!