2. amps-preamps
  3. 1424760675

Digital Amplifier Questions

I've been wondering the following:

1. Do digital amps benefit from being left on 24/7in the same way the ss amps do?

2. Is plugging a digital amp into a different outlet as your preamp as crucial compared to a ss amp?

3. Do digital amps have small transformers? If so, is distancing equipment from one another less important? (My peachtre Nova Pre/220 look best stacked)

4. When upgrading power cords on a digital amp, do you look for cords that do well with digital gear like your preamp and dac, or do you still go for a beefy cord?

I apologize ahead of time for my ignorance on the matter! Thanks!
128x128b_limo
guidocorona
4,298 posts
 
Hi Mapman, no I have never had an amp manufactured by Class D Audio in my system.
timlub
2,039 posts
 
Every component that I've ever had, preamp, amp, dac, etc, has benefited sonically by leaving it on. Even tubes, I eventually turned off my tube gear to save on life, but on long lasting pre amp tubes, I did experiment over a few weeks never turning them off and you could hear it.
guidocorona
4,298 posts
 
Yep... Worth pointing out that my old Rowland M7 monos, which were almost class A amps, reached best performance after one week (yes, that is 7 days) of operation... Tried that one fine Christmas break... The creatures sucked up 720W per side for some three weeks... By the end of the first week they did sound really golden... When wifie received the AC bill she almost threw me out of the house.

May Gaia bless class D... Rowland M925 monos are on 24/7, and I never heard one peep of complaint from Mrs. Better Half.

G.
b_limo's avatar
b_limo OP
2,276 posts
 
Guidocorona,
Have you had any experience with the Peachtree 220? If not, maybe you could pull up the specs and let me know what you think?

Mapman, Guidocorona, Timlub and Xti, thank you all for your helpful and informative posts! I appreciate it and hopefully others will benefit from this also.

Ps, Mapman, I researched Bel Canto last night and a pair of the Ref500m monoblocks and a Dac 3.7 or Dac 2.7 looks like that be an awesome system. You've got me interested in Bel Canto now :)
There's also a pair of Ohm Walsh 4's for sale local to me; if I had the $ for them I'd go listen to them.
mapman's avatar
mapman
22,213 posts
 
If you look at second hand OHMS, be sure to identify what version/generation drivers on them. They all tend to look similar on teh outside but each version will sound differnet with the most current ones being the most refined. Mine are series 3 which is one generation old now (current sereis are designated X000) and superceded original X series (including Walsh 4's) and mkII series. Also custom mods to all of those have been done over the years. So unfortunately it can be very difficult to know for sure sometimes unless the source is trusted or maybe John Strohbeen at OHM can help confirm.
More to discover