2. analog
  3. 124110-73989

Cartridge Alignment

Hi Guys, 

I need some expertise from the forum I'm at wits end over this. I have a Pro-Ject RPM-1 Turntable with a Grado Statement Series Platinum 1 Cartridge. I've aligned the cartridge using both the supplied Pro-Ject alignment tool and the Purest Audio Model PT-89-A tool. Both are aligning the same, stylus tip in the dot, front and sides aligned to the grid and the height of the top cartridge is parallel to the height line on the Purest Audio tool as well as both front and side are 90 degrees to the platter.

What I'm experiencing:
- Distortion starting about halfway through the album to the end. The first 2-3 tracks are mint 
- Over emphasized and brassy high's especially on S's, C's T's and cymbals. 

What am I doing wrong, should I be aligning to a different standard? I'm afraid I'm damaging my albums! Any help would be appreciated.

Thanks,
Skyy92677
skyy92677
stringreen's avatar
stringreen
6,399 posts
 
Some things come to mind....is the turntable absolutely level....is the cartridge tracking at about 1.7 grms....is the arm free of drag as you move it to the spindle and back by hand....did you get the cartridge new...look at the stylus head on and see if its bent...  I know Grados well, and this is not the Grado sound.  Call Grado and hear what they say...
skyy92677 OP
2 posts
 
Thanks Stringreen, Cartridge is mine, not much use - AAA grade albums. I'm a Grado fan, I have a Gold G2+ that tracks perfectly, kinda disappointed in this one. I'm tracking at 1.559 - digital force gauge. I've tried moving the anti skate to all 3 settings with no change. Table level as well. it's a mystery for sure!
palasr
520 posts
 
I'd try using an arc protractor - much more accurate.
More to discover